High power type Series PM570BP / PM605BP - ITOH DENKI - #1

Text version of the page

POWER MOLLER HIGH POWER THREE PHASE SERIES PM570BP 57 PM605BP 60.5 FEATURES: PM570/605BP series Power Moller are designed to generate 150% more torque than standard unit, with powerful inner rotor design motor. - IP-54 enclosure as standard - Class E Insulation - Supplied with No A-200 terminal bracket OPERATION: Continuous or intermittent operation Minimum contact time 3 seconds ON, 5 seconds OFF Reversible Applicable ambient temperature -10 �` +40ßC DIMENSIONS: PM570BP (= 57), PM605BP (= 60.5) OPERATING CHARACTERISTICS at 50Hz Nominal Input Current (A) Speed Peripheral Velocity (m/min) Tangential Force (N) Starting Torque (Nm) 200V 220V 570 605 570 605 570/605 No load current 5 5.0 5.3 337.4 317.9 9.62 0.11 0.10 8 7.0 7.4 238.5 224.7 6.80 Starting Current 10 9.9 10.5 168.7 158.9 4.81 0.32 0.30 15 18.9 20.0 88.5 83.4 2.52 Input Power (W) 20 25.5 27.0 70.0 65.9 1.99 30.5 30.0 30 36.0 38.2 49.5 46.6 1.41 Output Power (W) 40 55.4 58.8 32.2 30.3 0.92 15.2 15.0 1N=0.1019kg 1Nm=10.19kgcm OPERATING CHARACTERISTICS at 60Hz Nominal Input Current (A) Speed Peripheral Velocity (m/min) Tangential Force (N) Starting Torque (Nm) 200V 220V 570 605 570 605 570/605 No Load Current (A) 5 6.0 6.3 270.3 254.7 7.70 0.09 0.09 8 8.4 8.9 191.1 180.1 5.45 Starting Current 10 11.9 12.7 135.1 127.3 3.85 0.31 0.28 15 22.7 24.1 70.9 66.8 2.02 Input Power (W) 20 30.6 32.5 56.1 52.8 1.60 28.5 27 30 43.3 46.0 39.6 37.3 1.13 Output Power (W) 40 66.6 70.7 25.8 24.3 0.73 14.5 14.0 1N=0.1019kg 1Nm=10.19kgcm