Brushed motor type Series PM380DS - ITOH DENKI - #1

Text version of the page

POWER MOLLER DC MAGNETIC MOTOR SERIES PM380DS 38 FEATURES: PM380DS series Power Moller are designed to operate with low DC voltage for specific brush application like AGV. - Stronger torque - IP-54 enclosure as standard - Class E Insulation - Supplied with No D-400B terminal bracket that has built-in overload protection and No.H-011B bracket to fix the output shaft OPERATION: Intermittent Operation Not suitable for continuous operation as the carbon brush has life limit of 4000 hours. Use PM486/500FE or PM570/605FE series if continuous operation or long life is required. Minimum contact time 3 seconds ON, 2 seconds OFF Reversible Applicable ambient temperature -10 �` +40ßC DIMENSIONS: PM380DS (= 38) OPERATING CHARACTERISTICS 24VDC Nominal Speed Peripheral Velocity (m/min) Tangential Force (N) Starting Torque (Nm) Input Current (A) 2 1.6 287.9 5.47 Nominal Starting 5 3.6 127.4 2.42 10 8.1 65.3 1.24 25 18.8 27.9 0.53 0.28A 0.80A 1N=0.1019kg 1Nm=10.19kgcm NOTE: Power supply must be 24VDC battery or full wave rectified and smoothed current (ripple �ƒ10%) STANDARD TUBE LENGTHS AND PRODUCT WEIGHTS Tube L length (mm) 200 250 300 400 500 600 Weight (kg) 0.8 0.9 1.0 1.2 1.4 1.6 Spring loaded shaft X X X X X X .