Accumulation type Series PM570AU / PM605AU - ITOH DENKI - #1

Text version of the page

POWER MOLLER ACCUMULATION THREE PHASE SERIES PM570AU 57 PM605AU 60.5 FEATURES: PM570/605AU series Power Moller are designed for applications requiring extended stall period. - Special high impedance motor, which draws low current under any load condition, allows loads to be accumulated limitlessly, without overheating. - IP-54 enclosure as standard - Class E Insulation - Supplied with No A-200 terminal bracket - 3 phase units only - Use accumulation type, if the loads are to be accumulated OPERATION: Continuous duty 24 hours, or Intermittent Operation Normal or stalled operation Applicable ambient temperature -10 �` +40ßC DIMENSIONS: PM570AU (= 57), PM605AU (= 60.5) OPERATING CHARACTERISTICS at 50Hz Nominal Input Current (A) Speed Peripheral Velocity (m/min) Tangential Force (N) Starting Torque (Nm) 200V 220V 570 605 570 605 570/605 No load current 4 3.4 3.6 57.5 54.2 1.64 0.06 0.04 5 4.7 4.9 42.1 39.7 1.20 Starting Current 8 6.8 7.2 28.8 27.1 0.82 0.07 0.06 9 8.6 9.1 22.8 21.5 0.65 Input Power (W) 10 9.3 9.9 21.1 19.8 0.60 10 9.1 13 11.8 12.5 19.3 18.2 0.55 Output Power (W) 15 14.3 15.2 16.8 15.9 0.48 1.2 1.0 20 20.5 21.7 11.9 11.2 0.34 30 29.8 31.7 8.4 7.9 0.24 45 39.1 41.5 6.3 6.0 0.18 1N=0.1019kg 1Nm=10.19kgcm