• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

Deburring centers, ROBOTOOL ROBOTFLEX - 3 Pages

  1. P. 1

  2. P. 2

  3. P. 3

Catalogue excerpts

DEBURRING CENTERS ROBOTOOL ROBOTFLEX Deburring centers The high pressure water jet deburring (HPWD) is a hybrid system that permits to deburr and clean the parts inside a single machine at the same time. The technology guarantees removing of the chips from blind ohles, pockets,angles, internal and external surface of the pieces. This advanced technology is used in case of complex metal parts that required a high level of precision and elevate cleanliness standards. It permits to treat pieces of different shapes and materials in order to satisfy even important production mix with large capacity. The center can operate at the pressure up to 1100 bar, depending on the pieces’ material. Example of treated pieces: » ABS braking system » callipers » gear boxes » pump bodies » water/oil pumps » turbochanger » covers » flanges » engine-blocks » bearing-housing » camshafts » crankshafts » crankcases Property of I.T.F. Group – only for confidential use. Disclosure, copying and distribution prohibited

 Open the catalogue to page 1

DEBURRING CENTERS ROBOTOOL ROBOTFLEX These machines are realized for deburring, washing, rinsing and drying of various components even with high production mix. In this configuration, the robot moves the treated part around the fixed toold wall. It is possible to process different codes of the same family at the same time and without any retooling. In more difficult cases the machine can be equipped with bar-codes or inductive pads system. The transfer of the pieces take place on pallets or on a rotating table. Degreased and deburred pieces can be direcly assembled or packaged. Thanks to the high...

 Open the catalogue to page 2

STANDARD Cycle prewashing deburring MODEL MOVABLE RAMPS SPRAYING DEBURRING 400 600 800 YES/NO YES/NO YES/NO high pressure water deburring tool and/or brush deburring PreW-Dr-PostW-B PreW-Dr-PostW-B PreW-Dr-PostW-B postwashing rinsing 400, 600, 800 - passage section PreW-Dr-PostW-B: Prewashing-Deburring-Postwashing-Blowing demineralized rinsing blowing recirculated dying air vacuum drying stainless steel AISI 304 construction water recovery system disoiler - oil separator clean rinse tank separation dirty-clean multi-positions floater for solution level control solution automatic reset tank system...

 Open the catalogue to page 3

All I.T.F. Group catalogues and technical brochures

  1. CR

    3 Pages

    En
  2. MINI

    1 Pages

    En
  3. LTA

    2 Pages

    En
  4. LT PP / LT PL

    5 Pages

    En
  5. LC

    3 Pages

    En
  6. TRANSFER

    2 Pages

    En
  7. LT

    3 Pages

    En