You may also be interested in
Multi-gas detector, Monitoring device, Leak detector, Analyzer, Gas sensor
Text version of the page
accessories
To complement the SF6 GasCheck P1 and LeakCheck P1:p a number
of high quality accessories are available. Please see the table below
for more information.
Handgun Functions explained
Both the SF6 GasCheck P1 and LeakCheck P1:p instruments are supplied
as standard with a 5 m cable connecting the handgun to the main unit.
This allows the user to search large and difficult-to-reach areas quickly
and easily. The main unit does not even need to be in sight of the user
as the handgun contains all the control and display elements required
for searching. An LED alarm will switch on whenever a measured value
is over 20% of the limit value, and an audible alarm can also be set in
the same way as a percentage to alert the user to a leak. For added
assurance the handgun can be set to vibrate when a leak is detected
so the user can be in no doubt that a leak has been found.
tecHnical SPeciFication
MeaSuReMent PRinciPle
Negative Ion Capture (NIC): a non-radioactive, non-restricting
carriage and no licensing required.
SenSitivity
Standard SF6 GasCheck P1 and LeakCheck P1:p
1 x 107 ml/sec, 1 ppm, 0.01 gm/yr SF6
Highsense option
1 x 108 ml/sec, 0.1 ppm, 0.001 gm/yr SF6
ReSPonSe
T90 = < 1 second rise and clear down
oPeRation
Lead acid battery, internal and fully protected
Recharge between 85-265 AC V, 50/60Hz
alaRM
Audio and visual with an optional handset alarm
MeaSuReMent unitS
Measures in ml/sec, gm/yr and ppm
Range: each unit 1:500
Accuracy: ± 5% of displayed leak rate or ± 2 digits
Repeatability: ± 1 digit
caliBRation
Via CalCheck calibration accessory
Data loGGinG
Over 500 data points with date and time stamp
Download via RS232 to a PC
teMPeRatuRe
Storage: -10 to 60 oC (14 to 140 oF)
Operating: 0 to 50 oC (32 to 122 oF)
DiMenSionS
SF6 GasCheck P1
Consol: 340 x 350 x 170 mm (13.4 x 13.8 x 6.7”)
Shipped: 810 x 430 x 450 mm (31.9 x 16.9 x 17.7”)
SF6 LeakCheck P1:p
Consol: 500 x 400 x 190 mm (19.7 x 15.7 x 7.5”)
Shipped: 520 x 430 x 210 mm (20.5 x 16.9 x 8.3”)
WeiGHt
SF6 GasCheck P1
10.4 kg (22.9lb) Handgun 0.56 kg (1.2lb) Shipped 25 kg (55 lb)
SF6 LeakCheck P1:p
Shipped 15 kg (33 lb)
ION SCIENCE is ISO9001:2008 certified
4965 11/08. Part number GCLC V1.4 This publication is not intended to form the basis of a contract and specifications can change without notice.
For further information and ordering please call:
tel: +44 (0) 1763 208 503
email: info@ionscience.com
www.ionscience.com
ION SCIENCE LIMITED
The Way, Fowlmere, Cambs. SG8 7UJ, UK
Part No. Accessories
A-23010 Printer with communication cables
23007 10 m extension hose fitted with
male and female lemo connectors
23006 5 m extension hose fitted with male
and female lemo connectors
23004 300 mm probe extender tip, with
fine tube for finding leaks in
awkward areas
A-21520 CalCheck with single point
calibration filled with SF6 gas
5/BA-10 SF6 gas 0.1% Vol
5/BA-11 SF6 gas 1% Vol
Ready for
measuring
not ready
for measuring
Special
Switch between
search and
measure mode
Measured
value above
20% of limit
alarm 100%
Message on
main display
Memory store
measured
value
Zero
|
|