IF30 Fixed RFID Reader - INTERMEC - #2

Communications Interface options: Ethernet 10/100BaseT and RS232 for configuration Configuration: Internal web Graphical User Interface (GUI)

General Purpose Input/Output (GPIO): Four input (0-40VDC) and four output (0-48VDC .25 amp) circuits, 500ma 12VDC power

Four - Connectors: FCC-Reverse SMA. ETSI Standard SMA, 30 dBm to 10dBm RF power output software

controlled

110-240 VAC auto ranging

Power Supply is internal and included

Duty Cycle: 100%

865, 869 and 915 MHz

Fairchild G1 ISO 18000-6b ISO 18000-6c Philips Version 1.19

EPCglobal UHF Gen 2

ANSI INCITS 256:2001 Intermec Basic Reader Interface

Ethernet IPv4 6 IPv6 RS232 for configuration

Syslog Client

HTTP/HTTPS Web Server TFTP Client DHCP Client DNS Client SNTP Client

OpenSSL

Radius configuration login

SNMP

Intermec SmartSystems™ client Wavelink Avalanche™ Client

Antennas, antenna cables, mounting bracket

AIAG B-11 ANSI MH10.8.4 ISO/IEC WD18000 Part 6

IF30 uses the IM5 module, which is EPC Certified Compliant and EPC Certified Interoperable.

Some approvals and features may vary by country and may change without notice.

Please check with your local Intermec sales office for further information.

Intermec reserves the right to make changes without notice to any products herein for any reason at any time, including but not limited to improving the reliability, form, fit, function or design. Please contact Intermec for current price list and availability.

provide process analysis, site analysis and installation. By deploying the full suite of services, your system performance will be guaranteed for 18 months, or you may simply select the service that will facilitate the completion of your RFID roll out.

In support of a global supply chain, the IF30 is FCC and ETSI certified, and is factory configured to operate in RFID frequency bands 865MHz, 869MHz and 915MHz.

The IF30 is an UHF fixed reader that can be factory configured to operate in RFID frequency bands: 865MHz, 869MHz and 915MHz. In addition to performing both read and write functions, the IF30 has built in general purpose input output (GPIO), 4 mono-static RF ports and a built-in power supply.

Length: 32.35 cm (12.74 in) Width: 22.60 cm (8.90 in) Height: 8.25 cm (3.25 in) Weight: 6.75lbs (3.06 Kg)

Operating Temperature: -20°C to 55°C (-13° F to 131° F) Storage Temperature: -30°C to 75°C (-22° F to 167° F) Humidity: 10% to 90% (Non-condensing) Enclosure: IP53

6001 36th Avenue West Everett, Washington 98203 Phone: (425) 348-2600 Fax: (425)355-9551

Newport Beach, California Phone: (949) 955-0785 Fax: (949) 756-8782

Reading, United Kingdom Phone: +44 118 923 0800 Fax: +44 118 923 0801

Headquarters Office Singapore

Phone: +65 6303 2100

Fax: +65 6303 2199

www.intermec.com Worldwide Locations: www.intermec.com/locations

Toll Free NA: (800) 934-3163 Toll in NA : (425) 348-2726 Freephone ROW: 00 800 4488 8844 Toll ROW : +44 134 435 0296

Phone: (425) 348-2762

Phone: (513) 874-5882

Toll Free NA: (800) 755-5505 Toll in NA : (425) 356-1799

Copyright © 2007 Intermec Technologies Corporation. All rights reserved. Intermec is a registered trademark of Intermec Technologies Corporation. All other trademarks are the property of their respective owners. Printed in the U.S.A. 611799-01B 03/07

In a continuing effort to improve our products, Intermec Technologies Corporation reserves the right to change specifications and features without prior notice.