PPI-04 Instruction Manual - Interinar Electronics, LLC. - #4

/ 4


catalogue search
P. 01
P. 02
P. 03
P. 04
Pages:


See other catalogues for Interinar Electronics, LLC.

Text version of the page
The PPI-04 interface does not offer a galvanic isolation between PC and the motor driver.
Use isolated power supply only. Before connecting parallel cable to PC check the voltage between chassis of the PC and GND of the PPI-04. The voltage difference should not exceed 0.5Vdc.
AUXILIARY CIRCUITS CONNECTED TO J7 - SAMPLES
1 4
Jl
SAMPLE INPUT CONNECTION
INTERINAR ELECTRONICS
STEP MOTOR DRIVER BSD-01V2ORBSD-02
X-AXIS
The samples of the auxiliary circuits shown to the left are provided for illustrational purposes only and should be treated as such. The real application may require different values of the components and/or modification of the circuitry.
DO NOT EXCEED +5V PER INPUT
SAMPLE OUTPUT CONNECTION
+5V
A
1
OUT*
TTL
OUTx
* DO NOT EXCEED 15mA PER OUTPUT
USEFC10F-F FLAT CABLE P/N: FC10-14I
interinar
:trdnii
PPI-04
To provide power to the PPI-04 interface at least X-Axis driver must be connected.
□ □ □ □ □
□ □ □ □ □
J3
TO X-AXIS DRIVER
□ □ □ □ □
□ □ □ □ □
J4
TO Y-AXIS DRIVER
TO PARALLEL PORT OF THE PC COMPUTER
USE DB25 M-M STRAIGHT THRU CABLE P/N: PC305-06M
□ □ □ □ □
□ □ □ □ □
J5
TO Z-AXIS DRIVER
□ □ □ □ □
□ □ □ □ □
J6
□ □ □ □ □
□ □ □ □ □
TO A-AXIS DRIVER
J7
□ □ □ □ □
□ □ □ □ □
□ □ □ □ □
□ □ □ □ □
TO AUXILIARY INPUTS/OUTPUTS
TITLE Parallel Port Interface _Block Schematic
524676
DWG:
SHE
http://www.interinar.com support@interinar.com
DWG M.W.
We have used our best effort in preparing this document. We make no representations or warranties with respect to the accuracy or completeness of the contents of this document and specifically disclaim any implied warranties of fitness for a particular purpose. We shall not be liable for any loss of profit or any other commercial damages.
D1004.06
I LJI
I DATE
JwqI 09-03
rILE NAME
1:1
REV
REV NOTE
DATE
PPI-
APVD M.W.

pageCatalog pdf di En 2012-05-22-30