SSM Sealed S-Type Load Cell (U.S. & Metric) - INTERFACE Inc - (Version JPG) - PDF Catalogue | Technical Documentation

The Leader in Force Measurement

Model SSM Sealed S-Type Load Cell (U.S. & Metric)

Why the Interface model SSM Sealed S-Type Load Cell is the best in class:

• Proprietary Interface temperature compensated strain gages

• Environmentally sealed

• .02% nonrepeatability

• .0008%/°F (.0015%/°C) temp. effect on output

• .025% creep

• Tension and compression

SPECIFICATIONS

ACCURACY - (MAX ERROR)

Nonlinearity-% FS..............................±0.05

Hysteresis-% FS................................±0.03

Nonrepeatability % RO......................±0.02

Creep, in 20 min-%............................±0.025

TEMPERATURE

Compensated Range-'F......................0 to 150

Compensated Range-'C......................-15 to 65

Operating Range-'F............................-65 to 200

Operating Range-'C ..........................-55 to 90

Effect on Output-%/'F - MAX..............±0.0008

Effect on Output-%/'C - MAX..............±0.0015

Effect on Zero-% RO/'F - MAX............±0.0015

Effect on Zero-% RO/'C - MAX............±0.0027

ELECTRICAL

Rated Output-mV/V (Nominal)............3

Zero Balance % RO............................±1

Bridge Resistance-Ohm (Nominal) ....350

Excitation Voltage - MAX....................15 VDC

Insulation Resistance-Megohm..........> 5000

MECHANICAL

Calibration..........................................Tension

Safe Overload % CAP ........................150

Cable length-ft....................................10

Natural Frequency/Deflection:

Ibf N Deflection Nat. Freq.

(inches) (Hertz)

50 200 .003 1500

100 500 .004 1850

150 500 .004 1850

250 1000 .006 2350

500 2kN .005 2150

750 n/a .005 2350

1000 5kN .005 3350

2000 10kN .005 2400

3000 n/a .005 3000

5000 20kN .005 2520

STANDARD CONFIGURATION

10 ft Integral Cable (SSM-AJ-nn)

<or> PC04E-10-6P Standard Connector (SSM-AF-nn)

(Connector available only in 500-5K Ibf capacities)

OPTIONS

PC04E-10-6P Connector (SSM-500 and above) LEMO Connector Standardized Output High Temperature Extra Cable Length

ACCESSORIES

Load Button Instrumentation Mounting Hardware

Consult factory for more technical information

ENSIONS

r--


	CAPACITY
See Drawing	U.S. (Ibf)	Metric (N)	U.S. (Ibf)	Metric (N)	U.S. (Ibf)	Metric (kN)	U.S. (Ibf)	Metric (kN)
See Drawing	50	200	100,150, 250	500,700, 1000	500,750 1K,2K,3K	2, 5, 10	5K	20
	inch	mm	inch	mm	inch	mm	inch	mm
©	0.50	12.7	0.50	12.7	1.00	25.4	1.50	38.1
©	2.00	50.8	2.00	50.8	2.00	50.8	2.50	63.5
©	2.50	63.5	2.50	63.5	3.00	76.2	3.50	88.9
©	0.25	6.40	0.25	6.40	0.50	12.7	0.75	19.1
	1.00	25.4	1.00	25.4	1.00	25.4	1.25	31.8
	1/4-28	M6 x	1/4-28	M6 x	1/2-20	M12 x	5/8-18	M16 x
	UNF-2B	1-6H	UNF-2B	1-6H	UNF-2B	1.75-6H	UNF-2B	2-6H
©	1.88	47.8	1.88	47.8	1.88	47.8	2.38	60.5
	0.82	20.8	0.72	18.3	1.22	31.0	1.75	44.5


	)

	(

INTERFACE • 7401 E. Butherus Drive, Scottsdale, AZ 85260 • PHONE: (480) 948-5555 • FAX: (480) 948-1924

SSM_47

www.interfaceforce.com • Email: gen@interfaceforce.com • ORDER TOLL-FREE 1-800-947-5598 12/05

SSM Sealed S-Type Load Cell (U.S. & Metric) - INTERFACE Inc - #1

Weight indicator, Indicator, Load cell, Single point load cell, Converter