SML Low Height Load Cell - INTERFACE Inc - (Version JPG) - PDF Catalogue | Technical Documentation

The Leader in Force Measurement

Model SML Low Height Load Cell

Why the Interface model SML Low Height Load Cell is the best in class:

• Proprietary Interface temperature compensated strain gages

• From 3/4" high

• Performance to .05%

• Low extraneous load sensitivity

• Tension and compression

• .0008%/°F temperature effect on output

• Overload protection (SML-5 and SML-10)

SPECIFICATIONS

ACCURACY - (MAX ERROR) 5-300 500, 1000 Nonlinearity-% FS ±0.05 ±0.10

Hysteresis-% FS ±0.05 ±0.10

Nonrepeatability-% RO ......................±0.03

Creep, in 20 min-%............................±0.05

TEMPERATURE

Compensated Range-'F......................0 to 150

Compensated Range-'C......................-15 to 65

Operating Range-'F............................-65 to 200

Operating Range-'C ..........................-55 to 90

Effect on Output-%/'F - MAX..............±0.0008

Effect on Zero-% RO/'F - MAX............±0.005

ELECTRICAL

Rated Output-mV/V (Nominal)............2.0

Zero Balance % RO............................±1.0

Bridge Resistance-Ohm (Nominal) ....350

Excitation Voltage - MAX....................15 VDC

Insulation Resistance - Megohm........> 5000

MECHANICAL

Calibration..........................................Tension

Safe Overload-% CAP:

5, 10 lbf..................................800

25-1000 lbf............................150

Cable length-ft.................................... 5

Natural Frequency/Deflection:

STANDARD CONFIGURATION

5 ft Integral Cable (SML-nn)

Extra Cable Length

Studs Instead of Threaded Holes

lbf

5,10 25 50 100 200,300

500,1000

Deflection (inches)

.005 .004 .003 .003 .003

.003

Nat. Freq. (Hertz)

3000 2500 3300 5000 4500

1800

CCESSORIES

Instrumentation

Consult factory for more technical information

DIMENSIONS


See Drawing			CAPACITY (lbf)		200,300
	5, 10		25, 50, 100		500,1000
	inch	mm	inch	mm	inch	mm
©	1.80	45.7	2.00	50.8	2.12	53.8
	0.52	13.2	0.64	16.4	0.90	22.9
©	0.73	18.6	0.73	18.6	0.98	24.9
	0.90	22.9	1.00	25.4	1.06	26.9
©	10-32 UNF-2B		1/4-28 UNF-2B		3/8-24	UNF-2B
©	.20 deep		.25 deep		.38	deep
©	0.34	8.6	0.46	11.8	0.72	18.3
	0.13	3.3	0.13	3.3	0.13	3.3
	0.29	7.4	0.38	9.7	.46	11.7
©	0.50	12.7	0.50	12.7	0.57	14.5

INTERFACE • 7401 E. Butherus Drive, Scottsdale, AZ 85260 • PHONE: (480) 948-5555 • FAX: (480) 948-1924

SML_51

www.interfaceforce.com • Email: gen@interfaceforce.com • order toll-free 1-800-947-5598 12/05

SML Low Height Load Cell - INTERFACE Inc - #1

Torque sensor, Reaction torque sensor, Signal converter, Sensor, Load cell