ED2 SkidWeigh Series Lift Truck On-board Check Weighing Systems The ED2 SkidWeigh Series are general application, heavy duty, fully automatic microprocessor electronic systems that will measure the load weight on any type of material handling vehicle regardless of the vehicle make, model, operating voltage or lifting capacity. Every time a load is picked up the increase in hydraulic pressure on the vehicle lifting circuit will automatically activate the “load weighing cycle” at sample rate of 16000 readings per session with measurement that is visually presented to the operator via six digit large LED display. The industry leading weighing benchmark for performance, technology and design engineered with the operator in mind the system is easy to use, accurate to +/- 1% of vehicle weighing capacity and capable of withstanding the most demanding and challenging material handling environments. Pressure Transducer INTEGRATED VISUAL DATA TECHNOLOGY INC.

PRODUCT SPECIFICATIONS Technical Data - Voltage from 12 to 55 VDC - Switching power supply -Two buttons fully automatic system calibration by lifting empty and loaded forks above the ground. Lifted calibration load weight should be at least of 30 to 50 percent of the vehicle maximum lifting capacity. - Reverse polarity protection - Operating current 60mA - Technology, micro controller - Readout type, large six LED digits - Bright red display intensity - Readout resolution 1,5,10,25, 50, 100 - RS-232 - Enclosure ABS, 120 x 80 x 55 mm - Weight, 0.5kg - Operating temperature -40 C + 70 C - Pressure...