Typical Applications Sheets of paper, cardboard, plastic foils, shiny metal surfaces or high-quality finely woven textiles are examples of such fine surfaces. Beyond these applications, the sensor can of course also be applied to more roughly textured materials. For applications with frequently varying materials, the most finely structured surface is the deciding factor in choosing between OPTIPACTS or F. In practice, the application scope of OPTIPACTF is primarily limited by the small tolerance of the operating distance and by the velocity limit. For fine-surface applications with greater distance variations and higher velocities, the type series COVIDIS is recommended.

OPTIPACTF

For Fine Surfaces The optics of OPTIFACTF have a four times higher magnification than those of OPTIPACTS. The increased optical resolution corresponds to a smal- ler velocity range of +/- 1m/s (60 m/min), but ena- bles applications on materials (such as regular pho- tocopying paper) with very fine surface structures, imperceptible at first glance to the human eye. The working distance is 15.5 mm +/- 1.5 mm. With the exception of a four-times higher resolution of the incremental signal, the electrical and mechanical interfaces, the accuracy as well as the range of fun- ctions of OPTIPACTF are identical to those of OPTIPACTS.
© VDW 6