Catalogs >
Instron >
8803 Servohydraulic Fatigue Testing System

8803 Servohydraulic Fatigue Testing System
2Pages

Catalog excerpts

8803 Servohydraulic Fatigue Testing System - 1

8803 Servohydraulic Fatigue Testing System Up to 500 kN The Instron 8803 is a versatile servohydraulic fatigue testing system that performs static and dynamic tests on materials and components up to 500 kN. 8803 systems provide complete testing solutions to satisfy the needs of advanced materials and component testing, and are ideally suited for fatigue testing and fracture mechanics. With a large number of configurations and options, including lower t-slot tables, the 8803 makes an ideal platform for any laboratory. ® • Double-acting servohydraulic actuator with force capacity up to ±500 kN (±110 kip) • High-stiffness, precision-aligned load frame with twin columns and actuator in lower base or upper crosshead • Designed for both dynamic and static testing on a variety of materials and components • Patented1 Dynacell™ advanced load cell technology for faster testing and reduction of inertial errors • Floor-standing servohydraulic fatigue testing system–frame requires less than 1.6 m² (16.6 ft²) of floor space • Choice of hydraulic configuration and dynamic performance to suit application • Hydrostatic bearing actuators for high side-load resistance and better alignment during testing • Extra-height and Extra-extra height frame options for testing longer load strings • Designed to be used with the 3520 Series of Hydraulic Power Units • Adjustable upper crosshead with hydraulic lifts and lock fitted as standard for easy adjustment of daylight • Compatible with a large range of grips, fixtures, chambers, video extensometers, protective shields, and other accessories Controller and Software The Instron 8803 is supplied with a digital 8800 controller that provides full system control including features such as automatic loop tuning, amplitude control specimen protect, 19-bit resolution across the full range of transducers, and adaptive control technology. It also allows access to WaveMatrix™ Dynamic Testing Software, Bluehill® Software for static tests, and other application specific software, such as the Low Cycle Fatigue or Fracture Mechanics suite.

Open the catalog to page 1

8803 Servohydraulic Fatigue Testing System - 2

8803 Servohydraulic Fatigue Testing System | Up to 500 kN Note! All dimensions in mm (Maximum Between Load Cell and Actuator at Mid-stroke, with Largest Capacity Actuator) Dynamic Load Capacity Actuator Stroke Extra-Extra Height Frame Patented1 Dynacell™ Fatigue-Rated Load Cell with Capacity to Suit Actuator ±0.5% of Indicated Load or ±0.005% of Load Cell Capacity (1-100), Whichever is Greater Manifold Options Single Valve, Dual Valve, or High-Flow Manifold Servo-Valve Options Hydraulic Pressure Supply Electrical Supply Single-Phase Mains 90-132 or 180-264 V 45/65 Hz with Power Consumption...

Open the catalog to page 2