6 Desiccant Dryers
Desiccant Dryers 7
Referenced to 20°C and 1 bar a, inlet 35°C and 7 bar g. Maximum working pressure is 10 bar g.
Desiccant is factory-installed on all models except D5300IB to D14900IB. Dimensions and weights are approximate.
Heatless Desiccant Dryer Specifications
So, how do you select the right desiccant dryer technology?
That depends on the variables, such as system demand,
compressed air capacity, air quality requirements and applicable
life cycle costs that are unique to your compressed air system.
Desiccant Dryer Features and Benefits
Motor Protection/Soft Starter (heated
blower only)
Reduces inrush current and stress on the mechanical system.
Environmental Protection
IP54 rating provides protection against dust and moisture
contamination (IP65 option for wash down applications).
Power Supply
Dryers operate at 50 Hz (all models) or 60 Hz (optional).
Pneumatic options also available on heatless models.
Centrifugal Blower (heated
blower only)
High performance centrifugal
blower enables the use of
ambient air for regeneration, eliminating compressed air loss.
High Performance Heater (heated
blower only)
Heats the air used for regeneration to increase the efficiency
of moisture removal.
B
C
D
E
F
G
H
Humidity Sensor
The sensor is part of the EMS package that allows
continuous monitoring of the dew point.
A
Heavy Duty Filters
Pre-filter: High efficiency removing oil aerosol content down
to .01 mg/m3 @ 21°C protecting and extending the life of
the desiccant.
After-filter: Heavy duty removing particles down to 1 micron
insuring high air quality downstream to the customer.
I High Performance Valves
High performance butterfly valves with self-energised sealing
provide quick response and long life. The valves are centrally
angled for easy access.
J
Desiccant Towers
The towers are rated for continuous 10 bar g operation.
The digital controller turns the towers off and on for
regeneration regulation.
K
Desiccant
Reliable high strength non-acidic desiccant provides maximum
performance and is easily stored and handled.
Cool Sweep Mode (heated
blower only)
Reduces temperature and humidity spikes that may
occur during switching.
Silencing Muffler
Reduce the exhausted air noise level to ensure a
worker-friendly environment.
Microprocessor Controller
Controls valve switching to correctly direct air flow and
operation of
blowers and heaters. Protects the dryer via
continuously monitoring operating parameters.
Safety Relief Valve
Protects the dryer from over pressurisation incase of fire.
L
M
N
A
C
D
E
F
G
H
I
J
K
L
M
B
N
Flow Flow Dimensions
Model -40°C PDP -70°C PDP In/Out Width Depth Height Weight
cfm m3/hr cfm m3/hr Connection mm mm mm kg
D160IL 94 160 75 128 1.0 BSP 1,029 762 1,600 241
D200IL 118 200 94 160 1.0 BSP 1,029 762 1,600 256
D275IL 162 275 130 220 1.5 BSP 1,130 813 1,676 321
D350IL 206 350 165 280 1.5 BSP 1,130 813 1,676 332
D500IL 294 500 236 400 2.0 BSP 1,232 813 1,702 419
D700IL 412 700 330 560 2.0 BSP 1,334 813 1,727 506
D900IL 530 900 424 720 2.0 BSP 1,435 864 2,083 710
D1000IL 589 1,000 471 800 2.0 BSP 1,435 864 2,083 755
D1600IL 942 1,600 754 1,280 3.0 BSP 1,626 1,067 2,235 1,016
D2000IL 1,178 2,000 942 1,600 3.0 BSP 1,626 1,067 2,235 1,100
D2500IL 1,472 2,500 1,178 2,000 DN100 1,994 1,397 2,057 1,350
D3300IL 1,943 3,300 1,554 2,640 DN125 2,134 1,549 2,388 1,773
Flow Dimensions
Model -40°C PDP Heater Blower In/Out Width Depth Height Weight
cfm m3/hr kW kW Connection mm mm mm kg
D500IB 294 500 6 3.0 1.5 BSP 1,334 813 1,727 670
D900IB 530 900 12 4.0 2.0 BSP 1,435 864 2,023 958
D1400IB 824 1,400 18 6.0 3.0 BSP 1,626 1,194 2,184 1,451
D1800IB 1,060 1,800 24 9.0 3.0 BSP 1,994 1,219 2,032 1,710
D2200IB 1,295 2,220 24 9.0 3.0 BSP 1,994 1,219 2,032 1,857
D2600IB 1,531 2,600 30 15.0 3.0 BSP 2,134 1,397 2,337 2,504
D3200IB 1,884 3,200 36 15.0 DN125 2,134 1,524 2,337 2,775
D3900IB 2,296 3,900 45 15.0 DN125 2,134 1,524 2,337 3,138
D5300IB 3,120 5,300 60 18.5 DN150 2,438 1,676 2,489 4,417
D7000IB 4,121 7,000 80 22.0 DN150 2,591 1,930 2,286 5,524
D9300IB 5,475 9,300 100 30.0 DN150 3,505 2,210 2,464 6,072
D10600IB 6,241 10,600 125 37.0 DN150 3,810 2,337 2,616 7,264
D14900IB 8,772 14,900 175 45.0 DN200 4,267 2,489 2,667 9,035
Heated Blower Desiccant Dryer Specifications
Ingersoll Rand Ultra Care
Helping you maintain a healthy business
UltraCare five year maintenance and performance
agreements have been designed to be easy to understand
with absolutely no surprises.
Find out more about protecting the heart of your business
contact your local distributor or Ingersoll Rand Sales office.
