Vacuum Control catalog - INFICON - #10

/ 219


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50


See other catalogues for INFICON

Text version of the page
SKY® Capacitance Diaphragm Gauge Vacuum Gauges Vacuum Gauges Catalog 2009 - A3 Specifications (other ranges) Specifications (standard products) CDG025D, CDG025D-S (continued) Measurement Range Torr 1000 100 10 1 0.1 F.S. (Full Scale) Pa 133,322 13,332 1,333 133 13 mbar 1333 133 13.3 1.3 0.13 Accuracy1) % of reading 0.2 0.2 0.2 0.2 0.5 Temperature effect on zero % F.S./°C 0.005 0.005 0.005 0.015 0.02 on span % of reading/°C 0.01 0.01 0.01 0.01 0.03 Resolution % F.S. 0.003 0.003 0.003 0.003 0.003 Pressure, max. kPa (absolute) 400 260 260 260 130 Lowest reading % F.S. 0.01 Lowest suggested reading % F.S. 0.05 Lowest suggested control pressure % F.S. 0.5 Temperature Operation (ambient) °C +5 ... +50 Bakeout (at flange)2) °C 110 Storage °C –40 ... +65 Supply voltage VDC 14 ... 30 Power consumption W 1 Output signal (analog) VDC 0 ... +10 Response time ms 30 130 Degree of protection IP 30 Standards EN 61000-6-2, EN 61000-6-3, EN 61010, UL 61010-1, CSA 22.2 No.61010-1, RoHS Electrical connection D-sub, 15 pole, male Setpoint3) two setpoints (SP1, SP2) Relay contact VDC / ADC 30 / 0.5 Hysteresis % F.S. 1 Materials exposed to vacuum Aluminum oxide ceramic (AI2O3), Vacon 704), stainless steel (AISI 316L5)), AgCuTi hard solder, sealing glass 1) Non-linearity, hysteresis, repeatability at 25°C ambient operating temperature without temperature effects after 2 hours operation. 2) Non-Operation. 3) CDG025D-S only. 4) 28% Ni, 23% Co, 49% Fe 5) 18% Cr, 10% Ni, 3% Mo, 69% Fe Measurement Range Torr – 200 – 20 – – 0.25 – F.S. (Full Scale) Pa 110,000 26,664 10,000 2,666 1,000 100 33.3 10 mbar 1000 267 100 26.7 10 1 0.33 0.1 Accuracy1) % of reading 0.2 0.2 0.2 0.2 0.2 0.2 0.25 0.5 Temperature effect on zero % F.S./°C 0.005 0.005 0.005 0.005 0.005 0.015 0.02 0.02 on span % of reading/°C 0.01 0.01 0.01 0.01 0.01 0.01 0.03 0.03 Resolution % F.S. 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 Pressure, max. kPa (absolute) 400 260 260 260 260 260 130 130 For further specifications, see table above.

pageCatalog pdf di En 2012-05-22-30