Text version of the page

Technical Features

Bending Capacity

Round Tube Ø50 mm x 3 mm(2” OD, 1-1/2” pipe GAS) Square Tube 35 mm x 35 mm x 3 mm (1-1/2” x1-1/2”) Solid Bar Ø28 mm (1-1/8” OD) photo: QB-50VDEplc model VDMplc model VDEplc model

Installed Power

main motor bending 2,0 HP = 1,5 Kw 2,0 HP = 1,5 Kw
clamping motor CD die NO 0,4 HP = 0,3 Kw

Working Range

maximum radius 225 mm
minimum radius 10 mm
maximum angle 180º

QB-50 QB-76

springback control independent (máx. 30º)
former relief size at the end of the bending (5º máx)
without packaging maximum speed 6 sec /180º
640 x 360 x 1060 mm weight packaging

Programming

850 x 510 x 1250 mm programs 25
weight bending cycles 10 per program
without packaging 165 Kg CB die automaticclamping NO YES, programmable
with packaging 180 Kg installation 3-phase, 308v; single phase, 220v 3-phase 380 v

Technical Features

Bending CapacityPotencia Instalada

Round tube Ø76 mm x 3 mm(3” OD, 2-1/2” GAS) Square tube 50 mm x 50 mm x 3 mm (2” x 2”) Solid bar Ø40 mm (1-5/8” OD)
photo: QB-76VDESplc model VDMplc model VDESplc model
main motor bending 2,5 HP = 1,9 Kw 5,5 HP = 4,0 Kw
clamping motorCB die NO 1,5 HP = 1,1 Kw

Working Range

maximum radius 400 mm
minimum radius 10 mm
maximum angle 180º
springback control independent (máx 30º)
former relief size at the end of the bend (máx 5º)
without packaging maximum speed 18 seg/180º 9 seg/180º
881 x 465 x 925 mm with packaging

Programming

1170 x 560x 1290 mm programs 25 25 (15 with QBR)
weight bending cycles 10 per program
without packaging 240 Kg CB die automaticclamping NO YES, programmable
with packaging 255 Kg installation 3-phase, 380v; single phase, 220v 3-phase 380v
Technical features can be modified without notice

INECO, S.A.

Polígono Industrial LANDABEN, calle C31012 PAMPLONA - ESPAÑA Phone(+34) 948 187 115 Fax(+34) 948 188 012

Brochure-QB Series - 16794 www

For further information pleasecheck out our web site at:

www.inecomachines.com

e-mail: ineco@inecomachines.com