Professional Data Input Systems - Made in Germany - INDUKEY - #10

Text version of the page

10 TKS Series – Front Mounting Foil Covered Industrial Keyboards www.tks.indukey.com InduKey® Keyboard Production GmbH & Co. KG circuit board of the keyboard, the back of the keyboard is equipped with a metal protective tray. Front mounting The front mounting of a keyboard is the kind of systems integration which is most widely used in the field of engine and tool building. The input device is firmly linked to the system; if it is accordingly mounted, a plane surface of the operating panel is the result. The front mounting is performed by means of threaded fastening bolts which are installed on the rear side of the keyboard front panel. The keyboard is embedded into the mounting surface of the system and is then screwed in place. A gasked reliably prevents liquids and dust from entering the carrier system. In order to create the cut-out, a cutting template can be used. For the mounting of the keyboard, the stay bolts are screwed by means of screw nuts. In order to protect the Integrated joystick: TKS-105a-JSTb-MODUL Compact: TKS-030-MODUL Optical 50-mm Trackball: TKS-105a-TB50oF80-MODUL Sketched cross section for front mounting possibilities Salient Plane IP 65