BELT DRYER FOR PRODUCT DRYING
Imtech DryGenic helps the food industry to produce better quality products in controlled temperature/humidity environment while minimizing utility usage and maximizing production rates. YOUR PARTNER Imtech DryGenic
dryers are designed for durability, sanitation and reliability and control temperature and humidity as required, delivering desired levels even with varying air inlet conditions. DRYING OF PRODUCTS The current demand of high-quality dehydrated products with properties with similar levels as found in the initial fresh product. In addition, the drying process should have a low production cost and a low environ-mental impact. The Imtech DryGenic belt
dryers are used to dry all kinds of product like; vegetables, fish, meat, and fruit products. Besides the drying of food and agriculture products, the belt
dryer can also be used for dehydration of various chemical and pharmaceutical products. The
dryer can be used for the drying of flaked, striped, noodle, cube and granule materials. This Imtech DryGenic
dryer has the characteristics of high efficiency and low energy. The design and the selection of the
dryer is decided by the wet and the dry product flow characteristics, lump / crust formation tendency and the thermal sensitivity.
The
dryer capacity and size and performance depends on the available heat transfer area and the operating conditions for the specific product. The combination of temperature cycles and drying times can be adjusted accordingly as to control the final product’s physical properties. The belt conveyor of the
dryer that loads drying material is based on single or multiple layers stainless steel belt. Because the air flows through the belt, the heat exchange is completely and evenly, production efficiency is high and the product quality is very good.GENERAL DESCRIPTIONS The raw material can be spread on the conveyer belt through suitable auxiliary mechanism such as distributor, vibrating belt, pulveriser or granulator. The drying tunnel is divided into zones, each maintaining a different temperature.
Belt
dryer 1/4
