Half/Fullstep IB462He - IMS Motor - #1

Text version of the page

REV101805 FEATURES • Very Low Cost • Ultra Miniature (1.2 x 2.4 x 0.28 inches) (30 x 61 x 7.1 mm) • Advanced Hybrid Design • Full or Half Step • Input Voltage (+12 to +48 VDC) • Output Current (0.1A to 2A Per Phase) • 20 kHz Chopping Rate • Alternative to Chipsets DESCRIPTION Based upon our popular IB462 Half/Full Step Driver, the IB462He is a low cost, high performance al ter na tive to larger drives. The small size of the patented IB462He makes it ideal for systems where space is at a premium without sacrifi cing performance. The IB462He operates between +12 and +48 VDC. This high voltage allows for greater speeds at higher torque. Combine this with 2A per phase of output current and 160 watts of power and you have a low cost al ter na tive to chipsets, all contained in a package that minimizes expensive real estate! The IB462He is our smallest and lowest priced drive. It will reduce time to market, increase reliability, and it comes with a 2 year warranty. The IB462He rep re sents affordable, state-of-the-art technology for the com pet i tive edge needed in today’s market. INT-462 Interface Board OPTIONS The INT-462 is an optional plugon in ter face board which can be used with the IB462He to facilitate test ing, or in situations where panel mount ing the IB462He is pre ferred. The INT-462 is much more than a sim ple pluggable inter face. It adds a dy nam ic array of fea tures to the IB462He, typically found only on larg er and more expensive drives. Features such as a +5 VDC switch ing power sup ply, +5 to +48 VDC opto-iso lat ed inputs which are in ter nal ly limited to 8mA, au to mat ic cur rent reduction, over current and short circuit pro tec tion, input capacitor, and fault and pow er LEDs. Wir ing is done through a 15 pin re mov able screw ter mi nal. The OSC-462H analog speed control board is an op tion for adding low cost, intelligent velocity control to the IB462He driver. The OSC-462H is powered by a single +12 to +48 VDC power supply, which will also provide power for the IB462He. The control board fea tures a digital oscillator for accurate velocity con trol with an output frequency of up to 60 kilohertz. The IB462He driver plugs easily into a 21 pin re cep ta cle attached to the OSC-462H. This device allows for a simple, cost ef fec tive solution in applications requiring variable velocity control. (Product details on page 8.) Also available is the H-462H heat sink, which only adds 2.21 cubic inches (36.1 cubic cm) to the overall foot print of the IB462He. OSC-462H Speed Control Board