Catalog excerpts
IMADA.CO.,LTD Load cell for compression and tension SW1/SW3 series Load cell for compression and tension SW1/SW3 series Easily to mount into equipment with the 2 female threads on the sides. The waterproof body enables measurement applications in wet environments. [Test image] [Main features] Eye bolt EB series (Sold separately) Easily integrate into your facility and equipment. Sutible for compress and pulling measurement due to easy mountable design. What is IP? IP(International Protection) is a standard which is based on IEC Standard 529 for solid foreign materials, electric devices for water and cabinet. IP67 Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1m of submersion for 30 minutes.) The second code (IP 0 to 8 for water penetration) The first code (IP 0 to 8 for human body and sold foreign materials) No ingress of dust, complete protection against contact. :eZ-Connect series eZ-Connect is composed of an amplifier and load cells. Enables to replace load cells without additional adjustment. Suitable for different types of tests such as tension and torque, measuring from low load to high load etc. Available load cells have a mark
Open the catalog to page 1IMADA.CO.,LTD Load cell for compression and tension SW1/SW3 series Specifications Model Refer to model list ±0.5%F.S. or less Rated output Nonlinearity Allowable voltage Safe overload rating Working environment (Allowable temperature) Temperature influence at 0 point Temperature influence for output Approx. 0.5~2m (Curl cord) Dimensions Weight See [Dimensions] 100N to 2000N: Approx. 200g 5000N: Approx. 300g *1 The accuracy is only load cell itself. Please refer to below “Separated Sensor Model” and “eZ-Connect series” for the accuracy of combinations with the amplifier (indicator). *2 IP67...
Open the catalog to page 2IMADA.CO.,LTD Load cell for compression and tension SW1/SW3 series [Sensor Model] Model Mounting thread SW3-20kN 20kN When order load cell without amplifier, please choose the connector type from below table. Connector shape 5 pin Connect to 6 pin Some discontinued IMADA products (Open end) For installing in equipment *Please check the connector shape of your equipment to connect. * Add the code to the end of model. For example: When order SW1-100N with 5 pin, the product model is “SW1-100N-5P”. [Separated Sensor Model] SW1 series Model ZTA-SW1-5000N ZTS- SW1-5000N FAP2-SW1-5000N 5000N *...
Open the catalog to page 3IMADA.CO.,LTD Load cell for compression and tension SW1/SW3 series [eZ-Connect series] Model * Please refer to each indictor specification for the details. *1 The accuracy is only available for combinations with the amplifier (indicator). Related products Eye bolt EB/RE series Measuring shaft Extra Small Load Cell LMU series Hoisting attachments for load cell. Measure tensile strength by letting a hook or a shaft through. It can be attached to load cell as male screw shaft. Load cell LMU series is extra small type for both tension and compression testing with 50N to 500N capacity. Standard...
Open the catalog to page 4IMADA.CO.,LTD Load cell for compression and tension SW1/SW3 series Related Cable Model Analog cable Analog cable (For optional -AN) To connect to a multi meter, oscilloscope. To connect to a multi meter, oscilloscope. To connect to PC having its own system. Open end connection cable Output cables for loose wire 37 pin (Useful for connection with unique equipment.) Cable with Terminal Block Allow doe connection with linear scale and external equipment such as PLC *1 *1 Displacement function is only available in ZTA series , eZT, FA Plus2, eFA Plus2. Related Adaptor Model CA-6T6 CA-10T10...
Open the catalog to page 5IMADA.CO.,LTD Load cell for compression and tension SW1/SW3 series Screw diameter * The protective cover is attached on model SW1-100N and 200N. Refer to l’,b’,h’ for dimensions for the cover. *1 The depth is 8mm. Screw diameter
Open the catalog to page 6IMADA.CO.,LTD Load cell for compression and tension SW1/SW3 series [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Do not apply force more than its capacity or from incorrect direction to the measuring shaft. - Do not use this product in the environments including fierce temperature changes, high temperature, high...
Open the catalog to page 7All IMADA catalogs and technical brochures
-
Force Recorder Next Series
8 Pages
-
Force Recorder Professional
7 Pages
-
Force Recorder Standard
7 Pages
-
OP-MX2EMX-IC/OP-MX250-IC
4 Pages
-
KC series
4 Pages
-
LM/LC/DD2/LMT series
7 Pages
-
CLFX / CFX Series
5 Pages
-
ZTS series
7 Pages
-
ZTA series
8 Pages
-
FSA series
7 Pages
-
FA Plus2 / eFA Plus2
11 Pages
-
HTGS/HTGA series
8 Pages
-
Specification list of cables
7 Pages
-
LMU/LU/ZD series
7 Pages
-
A-40/60,S-40/60
4 Pages
-
MTS series
7 Pages
-
XY-500N series
5 Pages
-
XST-500N
3 Pages
-
TS-5000N
3 Pages
-
SHF series
5 Pages
-
GTW-2500N
4 Pages
-
CCJ series
6 Pages
-
Vise Grips GT-30/2000N
4 Pages
-
DPU series
7 Pages
-
SKM-1000N
6 Pages
-
PGC series
4 Pages
-
DM-2000N
6 Pages
-
CBJ-200N
4 Pages
-
FBO-CFX
3 Pages
-
COF series
7 Pages
-
PK2-1500N
4 Pages
-
grp-50
3 Pages
-
P180-200N
6 Pages
-
P90‐200N
7 Pages
-
ZU series
6 Pages
-
SK series
6 Pages
-
SCX series
5 Pages
-
CHX Series
6 Pages
-
Pen Type Load Cell PN-50N
4 Pages
-
Torque Load Cell eHT series
5 Pages
-
HTGS/HTGA-TFX Series
8 Pages
-
TFX Series
4 Pages
-
Driver Torque Meter I-8/I-80
4 Pages
-
FCA-DSV-50N
4 Pages
-
IPTS-20N/50N
6 Pages
-
Peeling Tester IPTS-5N
7 Pages
-
SJS-100N-L/S
5 Pages
-
VWF-10N
6 Pages
-
APR-97
3 Pages
-
Force Logger Plus
4 Pages
-
Force Recorder Plus
8 Pages
-
ZLINK4
5 Pages
-
SDT series
4 Pages
-
MED-LFA-20N/MED-VH-5N
4 Pages
-
MED-NPT-200N
4 Pages
-
MED-ACU-2N
3 Pages
-
TKS-20N/250N
6 Pages
-
BT series
6 Pages
-
GC-1100/1200/5000, GCF-1200
5 Pages
-
HV series
5 Pages
-
SQ series
4 Pages
-
CW-500N
4 Pages
-
Force logger
5 Pages
-
MED-IS-20N
3 Pages
-
FC series
6 Pages
-
EMX-1000N
7 Pages
-
MED-SCT-500N
3 Pages
-
WG series
5 Pages
-
GP-15/30
4 Pages
-
GC-60/100
4 Pages
-
FP-50/51
3 Pages
-
SP series
4 Pages
-
PG series
4 Pages
-
PC series
4 Pages
-
P45-50N
4 Pages
-
GC-5/15
4 Pages
-
CP-150N
3 Pages
-
Force gauge comparison table
4 Pages
-
Optional handle FOH
3 Pages
-
FRTS series
6 Pages
-
MS series
5 Pages
-
PPC-5000N
4 Pages
-
DSV series
6 Pages
-
WL01 series
5 Pages
-
Compression attachment table
3 Pages
-
MH2 series
6 Pages
-
PTW-10IN/OT-8IN
3 Pages
-
AMK series
4 Pages
-
Universal Joint UJ series
4 Pages
-
ST-SS
2 Pages
-
SJ series
6 Pages
-
RSH series
5 Pages
-
HFC-50N
4 Pages
-
ZW1-10kN
6 Pages
-
CW-5000N
4 Pages
-
CH-5000N
4 Pages
-
LH-500N
5 Pages
-
UK series
5 Pages
-
PT series
6 Pages
-
FCA-50N
3 Pages
-
PK1-500N series
4 Pages
-
KV series
3 Pages
-
SH series
5 Pages
-
PSH series
5 Pages
-
PCA-150N
3 Pages
-
CH-5000N
4 Pages
-
FB/FS series
5 Pages
-
PS/PSS series
5 Pages
-
PSM series
5 Pages
-
SHT-5N
3 Pages
-
180 degree Peeling Tester
5 Pages
-
Force gauge attachment
5 Pages
-
Force Gauges
4 Pages
-
DS2 series
4 Pages
-
LMU series
8 Pages
-
ZD series
8 Pages
-
F-S Master
5 Pages
-
Friction Testing System
1 Pages
-
Peel testing system
1 Pages
Archived catalogs
-
ZTS series
7 Pages
-
ZTA series
9 Pages
-
Wire Harness Pull Tester
3 Pages
-
FCA-DS2-50N
3 Pages
-
MX-1000N
3 Pages
-
MX-500N
3 Pages
-
HV-3000N
3 Pages
-
MS-50N
4 Pages
-
SV series
4 Pages
-
Tensile Load Cell ZW1-10kN
6 Pages
-
PK1-500N/PK2-1500N
4 Pages
-
FA Plus
4 Pages
-
HV series
3 Pages