Catalogs >
IMADA >
PK1-500N series

PK1-500N series
4Pages

Catalog excerpts

IMADA CO.,LTD Special Use Load Cell PK1-500N/PK2-1500N Load cell for Two-wheeler Handbrakes PK1-500N Load cell for Vehicle Foot Pedals PK2-1500N Measure force acting on foot pedals or handbrakes. You can simply clip or mount on the load cell to perform measurements. Setting image *Grip the load cell and the brake together to measure force after mounting. Setting image *Clip a load cell onto a pedal and step them on together to measure force. What is IP? IP(International Protection) is a standard which is based on IEC Standard 529 for solid foreign materials, electric devices for water and cabinet. IP65 The second code (IP 0 to 8 for water penetration) The first code (IP 0 to 8 for human body and sold foreign materials) Water projected in powerful jets (12.5 mm nozzle) against the enclosure from any direction shall have no harmful effects at least for 3 minutes 100 liter per minute. No ingress of dust; complete protection against contact (dust tight) ：eZ-Connect series eZ-Connect is composed of an amplifier and load cells. Enables to replace load cells without additional adjustment. Suitable for different types of tests such as tension and torque, measuring from low load to high load etc. Available load cells have a mark

Open the catalog to page 1

IMADA CO.,LTD Special Use Load Cell PK1-500N/PK2-1500N Specifications * An amplifier (indicator) is required to read values. Please refer to below “Available amplifiers (indicators)” for the detail. *1 The accuracy is only load cell itself. Please refer to below “Separated Sensor Model” and “eZ-Connect series” for the accuracy of combinations with the amplifier (indicator). *2 IP65 is only approved for the load cell itself. The amplifier (indicator) and the connector parts are not approved. Available Amplifiers (Indicators) Separated Sensor Model eZ-Connect series Sensor Interchangeable...

Open the catalog to page 2

IMADA CO.,LTD Special Use Load Cell PK1-500N/PK2-1500N High accuracy coin shaped type LC series Standard type DPU series Coin shaped type LM series High accuracy built-in type load cell for general use._ Coin size load cell for compression. High accuracy coin shaped load cell for compression._ Extra small type LMU series Optional cables Sensor diameter is only 18mm Fit to measure automatic door closing force. Various cables are available. Analog cable (For -AN option): CB-118 - You can make graphs of force-displacement at real time via USB connection at 2000Hz. - You can write memo on each...

Open the catalog to page 3

IMADA CO.,LTD Special Use Load Cell PK1-500N/PK2-1500N Non-slip processing Non-slip processing [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Do not apply force more than its capacity or from incorrect direction to the measuring shaft. - Do not use this product in the environments including fierce temperature...

Open the catalog to page 4