Catalogs >
IMADA >
FA Plus

FA Plus
4Pages

Catalog excerpts

Digital force analyzer FA PLUS High speed sampling (2000 times/sec) Various measurements with load cells Easy to draw force-displacement curve with operation equipment. * Use as force-displacement unit: F-S Master, which is complete unit to make a graph of force-displacement curve. * Not included load sells. Please select one of our load cells to purchase this product. Products are calibrated and shipped with the selected load cell. [Use] Used for strength test for various materials (tensile test, compression test, shearing test, peeling test etc) More precise value is measured especially in impulse experiment by high-speed force sampling (2000 times/sec). Separated load cell is efficient when used for dangerous measurement or used in small space. High efficiency of measurement as factory automation system with external/output signal. Use with various load cells by IMADA. If sensor is broken, change to spare load cells swiftly (Need to calibrate by standard weight.) March, 2008

Open the catalog to page 1

Digital Force Analyzer Measurement unit Display style Track/Peak mode select Sampling rate update Capacity Approx. 200% F.S. (More than 110 %) Force Accuracy -0.2~0.2%F.S -1~11digit (with DPU load cells) Humidity capacity USB, Serial (RS232C),Analog (-2~+2V), Various comparator output (Total 5), Overload output Other functions Digital filter HI/Lo, Auto zero clear etc ZERO, GAIN for calibration ZERO, SEND, PEAK, CONF connecting switch Attachment Instructional manual, Power cable, Spare fuse, USB cable, Driver CD-ROM, [Software of force value reader: FAP Logger] Driver CD-ROM includes free...

Open the catalog to page 2

Digital Force Analyzer Please contact us for the attachment of adaptor to your equipment. Not included load cells. Please select into our load cells. It cause a sensor damage if the force of bending, twisting and exceeding capacity is applied, regardless of on/off power supply, Avoid using under the condition of sudden change of temperature, extremely hot or humid, wet or dusty places. The content is subject to change without notice. Although based on operating frequency or force range, measurement accuracy deteriorates little by little. We recommend periodical calibration.

Open the catalog to page 3

Digital Force Analyzer [Example of measurement unit with FA-PLUS 1] Test Unit: F-S Master series is easy to draw force-displacement curve. FA PLUS is optimum equipment to examine correlation of force and displacement by using load cell, measurement stand and software. * See the specifications for details. Force measurement Recorder Force-displacement measurement unit: F-S Master Attachment and computer are not included. [Example of measurement unit with FA-PLUS 2] There are USB, RS232C, comparator output, overload output and external point as functions of external input/output. It is...

Open the catalog to page 4