Text version of the page

We carefor pure Air.

ILT AirFiltrationTechnologies.

Welding Fume Filter MOBIFIL 1WRV26-1.5/A1

Filter Sections, Filter Elements 3 filter sections in 1 filter unit, filter elements in total: Frame with aluminium wire mesh, 13-ply, re-usable, 1 piece Frame with pre-filter mat, class F5, 0.47 m², 1 piece HEPA-filter (main filter), class H13, 17.9 m², 1 piece Data Sheet 06MOB012600-1 05.08 EN-A.DOC Collection Efficiency (Main Filter) 99.997% f. particles > 0.3 µm acc. To DIN 24184 99.95% f. particles in MPPS acc. To EN 1822 (MPPS = Most penetrating particle size) Cabinet material: 1.5 mm industrial-grade sheet steel DC01 AmEN 10130/10131 (St 12-03), reinforced, powder coated, dust drawer Maintenance Opening one big maintenance door for filter section access with 4 star-grip screws • dust container: drawer, 9 liters, with quick-release opener Direction of Air Flow on the raw gas side: vertically • on the clean gas side: vertically (shopfloor direction) Suction Device one ILTIS-extractor arm with gas springs, 360° rotatable, possible angle 90°, spot-extraction with outer supports and optimized airflow qualities Electrical Connection CEE-plug (16A) with phase changing switch Motor Performance, Operational Voltage 1.5 kW, 400 VAC, 50 Hz (spezial voltage on request available) Dimensions s. sketch overleaf (unit in standard design) Space requirements • ca. 500 mm in front of maintenance opening for maintenance purposes Weight

The welding fume filter

MOBIFIL

is your solution for problems arising from contaminated air by welding. Equipped with one suction arm,

ca. 142 kg Operating Noise

MOBIFIL

removes reliably smoke, dust, and fumes out of the work range of the welder. Contaminated air is cleaned and can afterwards remain in the workshop. This unit features a long-lasting high-performance particulate filter.

ca. 73 dB(A), measured in 1 m distance/height, free field condition Operating Conditions -25 to +40° C surrounding temperature, operation in workshops

MOBIFIL

has been tested by the em-ployers’ liability insurance association in Germany (BIA) and com- plies with the latest norms and work safety regulations.

Unit Complies with these Standards 89/392/EWG; GSG; TRGS 560; DIN EN 292; DIN 31000; DIN 31001; DIN EN 1088; DIN V 8418; UVV VBG 15; UVV VBG 113; DIN EN 457; DIN EN 842; ZH 1/487; UVV VBG 4; DIN EN 60204-1; DIN EN 60335-1 A2:1998, A5:1989, A6:1989, A51:1991, A52:1992, A53:1992, A54:1992; DIN EN 60335-2-69; DIN VDE 0550-1; UVV VBG 121; DIN EN ISO 3744; DIN EN ISO 11201

MOBIFIL

is economically priced at unrivalled low follow-up costs.

Type Designation Integrated Controls MOBIFIL 1WRV26-1.5/A1 • control unit with rotating field monitor • airflow monitor with nominal volume flow control and optical saturation alert • motor protecting switch Range of Application Precipitation of welding fumes and smoke; raw gas not ignitable or flammable (flash point 120° C) Unit Designs • second suction arm • cabinet made of stainless steel • increased suction performance (max. 2300 m³/h) • individual, custom made solutions on request deliverable Function Principle Filtering precipitator (mechanical) Ventilator Performance Scope of Delivery Blowing freely, 2000 m³/h Unit as described with 4 m electr. cable (w/o plug and accessories), ready-to-use Suction Performance Colour max. 1600 m³/h Powder coated RAL 5010 (gentian blue), other colours on request