Text version of the page

We carefor pure Air.

ILT AirFiltrationTechnologies.

Air Scrubber CLAROFIL

Separation performance ®

Air Scrubber NV130-7.5/V2A

90-95% > 1 µm (depending on wettability of contaminants) Casing Material min. 2 mm high-grade steel DC01 AmEN 100 882 (1.4301 3C), re-enforced, dust and liquid proof Data Sheet 06CLA011301-1 06.11 EN-A.DOC Maintenance access 4 main access for revision of intake, channelling and diffuser) Air guidance • crude gas side vertically (top-down) • pure gas side vertically (down-top) (with optional equipment air guidance can be changed) Air-technical connection • on the crude gas side with connector in desired diameter (recommended: Ø 400 mm), either for duct or hose connection • on the pure gas side free blow-out or via duct work Electro-technical connection With Filter Monitor or connection to existing controls Motor performance/Voltage 7,5 kW / 400 VAC 50 Hz (Special voltages on request) Water supply and connection Water consumption ca. 1 to 5 l/h in average (benchmark, may vary depending on the case of application) • hose con-nection to fresh water supply • alternatively: autonomous filling with proc-ess liquids Measurements See sketch overleaf Space required • in front of maintenance covers ca. 900 mm for maintenance access • above clean air outlet ca. 3 m blowing section (Data may vary depending on special equipment) Weights

CLAROFIL

Air Scrubber is an uncomplicated and rugged unit in com-pact design. Intelligent construction, high performance and eco-nomic operation are the main features of this unit.

Operation weight ca. 1800 kgs, Empty ca. 670 kgs Noise levels

CLAROFIL

can be quipped with various optional features (e. g. sediment collector, dos- ing units, etc.) to fit into different production environments.

ca. 85 dB(A), measured in 1 m height/distance (optional equipment recom-mended: silencer) Operating conditions

CLAROFIL

is suitable for standard and high-performance production environments with special demands (eg. Ex-areas).

-15 to +40° C surrounding temperature (Operation below zero only with optional heating equipment)

CLAROFIL is made of industrial high-grade steel (V2A) and has got a long service life with long service intervals

This unit complies with the standards 89/392 EWG, 73/23 EWG, 89/336 EWG Equipment, recommended silencer Equipment, optional Type designation (only exemplary, we can supply all equipment on request) sediment dred-ger, metering units, outlet plenums, duct work, Swirl precipitators,… NV130-7.5/V2A Case of application Precipitation of all kinds of dust (especially ignitable and explosive dust with especially equipped units) Function principle Scope of delivery As described (without options), ready for operation Wet precipitation (wash bottle wet scrubber) Colour Without colour (V2A) Ventilator performance ca. 10300 m³/h Suction performance max. 7900 m³/h