Text version of the page

We carefor pure Air.

ILT AirFiltrationTechnologies.

Air Purifier UNIFIL® 1MRV20-0.75 UNIFIL® 1MLV20-0.75

Collection Efficiency of Mainfilter 99.997% for contaminants > 0.3 µm according to DIN 24184 99.95% for contaminants in MPPS according to EN 1822 (MPPS = Most penetrating particle size) Data Sheet 06UNI010200-1 05.08 EN-A.DOC Cabinet material: 1.5 mm industrial-grade sheet steel DC01 AmEN 10130/10131 (St 12-03), reinforced, powder coated, leak proof for condensates, sump for precipitated liquids with drain connection for siphon 1" Maintenance Opening filter module/prefilter cell: one maintenance door with two double-bit locks mainfilter cell: cover with 6 star grip screws Direction of Air Flow • horizontally on the crude gas side • vertically on the clean gas side (with optional equipment, the direction can be adjusted individually) Airtechnical Connection • on the crude gas side with intake plate (accessory) with every desired di-ameter (recommended: Ø 200 mm) for pipe/hose connection • on the clean gas side: blowing freely Electrotechnical Connection with on-site line disconnector or separate Filter Monitor (accessory) Motor Performance, Operational Voltage 0.75 kW, 400 VAC, 50 Hz (special voltages possible on request) Dimensions see technical drawing overleaf showing a unit in standard design Space Requirements, Clearances

This unit is usually installed on a pedestal adjacent to the emission source (e.g. a machine tool). Alternatively, this precipitator can be mounted onto existing peripheral devices (e. g. swarf conveyors).

• ca. 800 mm in front of maintenance door for maintenance purposes • above clean gas exit: ca. 0.5 m blast section (data may vary depending on unit type and accessories employed) Weight

UNIFIL

has been designed for constant operation (24/7) and does not need recovery cycles. The unit can be connected to ma- chines/emission sources with ductwork or hoses. Special solutions as well as customized connection types are possible without problems – quickly and cost-effectively.

ca. 120 kgs Operating Noise ca. 72 dB(A), measured in 1 m distance/height, free field condition Operating Conditions -25 to+40° C ambient temperature, installation in workshop halls The unit complies with these Standards Type Designation DIN EN 292, DIN EN 60204-1, 89/392/EWG, 91/368/EWG, 93/44/EWG, 73/23/EWG, 89/336/EWG, 92/31/EWG, 93/68/EWG UNIFIL 1MRV20-0.75 UNIFIL 1MLV20-0.75 Recommended Accessory Range of Application • air intake connector with regulating valve (for connection to emission source/machine) • separate line disconnector in surface-type casing • drain siphon 1“ precipitation of aerosols, crude gas not flammable or ignitable (flashpoint 120° C) Function Principle Optional Accessory filtering precipitation (mechanically) (In extracts, only exemplary. Every accessory can be supplied on request:) pedestals, mounting frames, pipes/ductwork, hoses, outlet plenums . . . Ventilator Performance Unit Alternatives blowing freely 1,500 m³/h • mirror design: maintenance door on the unit’s opposite side (standard version: maintenance door on the right of airflow) • cabinet of stainless steel (V2A) • individual special designs on request Suction Performance adjustable (with intake plate), max. 1,200 m³/h Filter Sections, Filter Elements Scope of Delivery 2 filter sections in 1 filter module in 1 unit, filter elements in total: frame with Aluminium wire mesh, 5 layers, reusable, 1 piece frame with Aluminium wire mesh, 13 layers, reusable, 1 piece prefilter cassette, class F6, 4 m², 1 piece HEPA-filter as mainfilter, class H13, 13,9 m², 1 piece unit as described above (w/o accessories), ready for installation, Color powder paint RAL 5010 (gentian blue), other colors possible on request