Grease And Oil Electric Pumps PEG-PEO 520-540-580 Catalogue
27Pages

lubrication systems Electropumps for progressive systems

Fixed pumping element 19 Adjustable pumping element 23

Description PEG/PEO 520/540/580 are ideal for automatic lubrication of any kind of industrial systems. Along with progressive dividers DPL, DPX e DMX, they can lubricate more then 300 points using a single pump. Number of outlets Discharge for cycle (fixed discharge pump) Discharge for cycle (adjustable discharge pump) Lubricant Max working pressure Reservoir capacity Temperature Discharge port Float switch electrical level (grease) from 1 to 3 0.16 cc 0.01 - 0.16 cc Greases up to NLGI 2 max consistency Mineral Oils 50-1500 cSt 350 Bar 2 kg, 4 kg or 8 kg from -40 °C to +80 °C 1 / 4" G 1.5 A...

Technical data PEG-PEO pumps are designed for intermittent or continuous operation. Using an external PLC, lubrication cycles can be programmed for specific applications. A gearmotor controls an internal cam which operates on 3 externally mounted pumping elements. Each pumping element is equipped with an adjustable maximum pressure valve able to protect the pump and the elements from overpressures. It is possible to convey the flow rates of a second and a third piston to a single output for a greater flow. Installation The pumps must be mounted vertically through the mounting bracket...

The tank is made of transparent plastic material. It has a capacity of 2 KG, 4 KG or 8 KG and can be equipped with on-demand control of the minimum level. Pumps can operate at a recommended maximum pressure of 350 bar with a maximum flow rate of 0.16 cc / minute per output. The standard setting is 250 bar. The internal shaft is coupled to the pump reservoir with a special spatula to ensure the continuous suction of the pumping elements, even in the presence of grease with a NLGI 2 consistency and a room temperature of less than 40 °C. I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore -...

Electric motor Motor The PEG series electric pumps have a standard configuration that includes a three-phase engine. 115 V AC, 230 V AC 50/60 Hz or special voltages motors are available on request. Motor design Size Il motore trifase e fornito con connettore elettrico a stella I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - inFo@ilclube.it

PEG-520 is pump for grease with a 2 kg transparent reservoir. The standard version comes with a single output, additional pumping elements will have to be ordered separately. For orders with single-phase 115 V AC motors or with other voltages, replace the voltage value in the corresponding code, eg 41.2.380VR80CG (three-phase) becomes 41.2.115VR80CG (115 V AC single phase) *. Cycles /1' Cycles /1' Adjustable with electric level indicator Ordering code 41.2.380VF30CG 41.2.380VF50CG 41.2.380VF80CG 41.2.380VR30CG 41.2.380VR80CG Cycles /1' Cycles /1' Adjustable * Any cost variation due to the...

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it

PEG-540 is pump for grease with a 4 kg transparent reservoir. The standard version comes with a single output, additional pumping elements will have to be ordered separately. For orders with single-phase 115 V AC motors or with other voltages, replace the voltage value in the corresponding code, eg 41.4.380VR80CG (three-phase) becomes 41.4.115VR-80CG (115 V AC single phase) *. Adjustable discharge no * Any cost variation due to the use of engines other than the standard must be requested directly to ILC. I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 -...

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it

PEG-580 is pump for grease with a 8 kg transparent reservoir. The standard version comes with a single output, additional pumping elements will have to be ordered separately. For orders with single-phase 115 V AC motors or with other voltages, replace the voltage value in the corresponding code, eg 41.8.380VR80CG (three-phase) becomes 41.8.115VR-80CG (115 V AC single phase) *. Adjustable discharge no no no si si * Any cost variation due to the use of engines other than the standard must be requested directly to ILC. I.L.C. srl - Via Garibaldi, 149 - 20155 Goria Minore - Italy Phone +39 0331...

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it

PEO-520 is an oil pump with a 2 kg transparent reservoir. The standard version comes with a single output, additional pumping elements will have to be ordered separately. For orders with single-phase 115 V AC motors or other voltages, replace the voltage value in the relevant code, eg 41.2.380VR80CO (three-phase) becomes 41.2.115VR80CO (115 V AC single phase) *. with electric level indicator Ordering code 41.2.380VF30LO 41.2.380VF50LO 41.2.380VF80LO 41.2.380VR30LO 41.2.380VR80LO Adjustable discharge no no no si si * Any cost variation due to the use of engines other than the standard must...

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it

PEO-540 is an oil pump with a 4 kg transparent reservoir. The standard version comes with a single output, additional pumping elements will have to be ordered separately. For orders with single-phase 115 V AC motors or other voltages, replace the voltage value in the relevant code, eg 41.4.380VR80CO (three-phase) becomes 41.4.115VR80CO (115 V AC single phase) *. Adjustable discharge no no no si si * Any cost variation due to the use of engines other than the standard must be requested directly to ILC. I.L.C. srl - Via Garibaldi, 149 - 20155 Goria Minore - Italy Phone +39 0331 601697 - Fax...

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it