DR-DF valves Catalogue
11Pages

Dual-line systems Accessories End line pressure switch - fittings junction - piping

End line pressure switch 4 Junction blocks (dual line) 7 Junction block (single line) 8

Dual-line systems Dual-line system are used on large machines or systems. They can lubricate points at a great distance. System structure These systems consist of two main lines supplied by a high-pressure pump at up to 400 bar with alternating cycles. While one line is under pressure the other one is in relief (by a change-over valve). Sometimes it is possible to installa End Line Switch. The Control unit is usually installed near the pump. Operating The system operates a two-phases alternating cycle. In the first cycle, lubricant is pumped in main line (A) moving inlet and discharge...

End line pressure switch End line pressure switch The pressure switch is generally installed upstream of the last lubricant distributor in the main pressure line. It checks the system is working properly. It can send a signal when the system is done lubricating Dati tecnici Body Working range Protection rating Electrical features Fixed hysteresis Ordering codes Mechanical life Electrical contact SPDT Silver CLIENTE / CLIENT QUESTO DISEGNO E'DI PROPRIETA' ESCLUSIVA DELLA DATA /DATE DISEGNATO / DRAWN SISTEMA / SYSTEM DOPPIA LINEA IMPIANTI DI LUBRIFICAZIONE CENTALIZZATA S.R.L. LUBRIFICANTE /...

Control unit DUAL-LINE Control unit 5N.TW..IN.CU TWIN-CU is a latest generation electrical device suitable for controlling double line lubrication systems in which you want to monitor and control all the functions. All the functions and program choices are made via the front panel controls of the PLC on the outside of the closing door. The electrical equipment operates by setting the machine pause or pulse time and a working time. The cycle consists of a pump start-up signal reception from the pressure switch line 1 or line 2 for inversion. If this signal is not received, an alarm is...

Pipes and clips Metallic tubes Single pipe clip Single pipe clip with welding plate Tube Code clip Code plate Twin pipe clip Twin pipe clip with welding plate Code clip Code plate I.L.C. srl - Via Garibaldi, 149 - 20155 Goria Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - inFo@ilclube.it

DUAL-LINE Stright dual line Steel 90° dual line Steel T dual line Steel 01.180.5 I.L.C. srl - Via Garibaldi, 149 - 20155 Goria Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclub e.com - info@ilclube.it

Junction block (single line)Stright single line Steel 90° single line Steel T single line Steel 01.181.3 X single line Steel I.L.C. srl - Via Garibaldi, 149 - 20155 Goria Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it

DUAL-LINE Stright fitting Main line Tube 0 I.L.C. srl - Via Garibaldi, 149 - 20155 Goria Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it

Fittings and AccessoriesT junction fitting Junction T fitting I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it

I.L.C. srl - Via Garibaldi, 149 - 20155 Gorla Minore - Italy Phone +39 0331 601697 - Fax +39 0331 602001 - www.ilclube.com - info@ilclube.it MADE IN ITALY