Rail Guide Type Endless linear motion C-Lube Linear Way ML - Linear Way L
18Pages

{{requestButtons}}

Catalog excerpts

Rail Guide Type Endless linear motion C-Lube Linear Way ML - Linear Way L - 2

C-Lube Maintenance Free Series Identication Number and Specication Example of an identication number The specifications of ML(F) and LWL(F) series are indicated by the identification number. Indicate the identication number, consisting of a model code, dimensions, a part code, a material code, a preload symbol, a classification symbol, an interchangeable code, and a supplemental code for each specication to apply. The aquamarine end plate is the symbol of maintenance free. long term maintenance free supported! Interchangeable specication Track rail Single slide unit Single track rail...

Open the catalog to page 2
Rail Guide Type Endless linear motion C-Lube Linear Way ML - Linear Way L - 3

Identification Number and Specification — Model ■ Length of Slide Unit • Structure • Size Wide type : LWLF For applicable models and sizes, see Table 2.1 and Table 2.2. Indicate "LWL--B" or "LWLF---B" for the model code of the single track rail regardless of the series and the combination of slide unit models. Note (1) This model has no built-in C-Lube. slide unit Extra long C For applicable models and sizes, see Table 2.1 and Remark: For the models indicated in , the interchangeable specification is available.

Open the catalog to page 3
Rail Guide Type Endless linear motion C-Lube Linear Way ML - Linear Way L - 4

— Model • Length of Slide Unit • Structure • Size • Material Type — Table 2.2 Models and sizes of wide type ML(F) and LWL(F) series Notes (1) Not applicable to track rail with stopper pins (supplemental code 7S"). (2) Length up to the value in ( ) can be produced. If needed, please contact IKD Not applicable to tapped rail specifications. (3) Not applicable to interchangeable specifications or tapped rail specifications. Remarks 1. A typical identification number is indicated, but is applied to all models of the same size. 2. Indicate "LWL---B" for the model code of the single track rail...

Open the catalog to page 4
Rail Guide Type Endless linear motion C-Lube Linear Way ML - Linear Way L - 5

— Length of Track Rail — Table 3.2 Standard and maximum length of stainless steel track rail (Wide type) Note (1) Not applicable to track rail with stopper pins (supplemental code "/S"). Remarks 1. A typical identification number is indicated, but is applied to all models of the same size. 2. If not directed, E dimensions for both ends will be the same within the range of standard E dimensions. To change the dimensions, indicate the specified rail mounting hole positions 7E" of special specification. For more information, see page III-29.

Open the catalog to page 5
Rail Guide Type Endless linear motion C-Lube Linear Way ML - Linear Way L - 6

— Preload Amount — Preload amount Light preload To Specify this item for an assembled set or a single slide Ti For details of the preload amount, see Table 4. For applicable preload types, see Table 5.1 and Table Table 4 Preload amount Remark: The mark f^ZTJ indicates that interchangeable specification — Accuracy class — Accuracy Class I |_|jgn : |_| por interchangeable specification products, assemble a Precision : P slide unit and a track rail of the same accuracy class. Size 1 series have "No symbols." For the details of accuracy class, see Table 6.1 and 6.2. Table 6.1 Tolerance and...

Open the catalog to page 6
Rail Guide Type Endless linear motion C-Lube Linear Way ML - Linear Way L - 7

— Interchangeable Specification • Special Specification — This is specified for the interchangeable specifications. Assemble a track rail and a slide unit with the same interchangeable code. Performance and accuracy of For applicable models and sizes, see Table 2.1 and "No symbol" is indicated for non-interchangeable /A, /BS, /D, /E, /HB, /1, /LR, For applicable special specifications, see Tables 7.1, For combination of multiple special specifications, see For details of special specification, see page EI-28. Table 7.1 Application of special specifications (Interchangeable specification,...

Open the catalog to page 7
Rail Guide Type Endless linear motion C-Lube Linear Way ML - Linear Way L - 8

Special Specication Identication number LWLC 5 B 22 LWLFC 10 B 26.5 LWL 5 B 25 LWLF 10 B 30.5 LWLC 7 B 27 LWLFC 14 B 30.5 LWL 7 B 31.5 LWLF 14 B 39.5 LWLG 7 B 39 LWLFG 14 B 50 LWLC 9 B 30 LWLFC 18 B 34.5 LWL 9 B 39 LWLF 18 B 46.5 LWLG 9 B 49 LWLFG 18 B 58.5 LWLC 12 B 33 LWLFC 24 B 38.5 LWL 12 B 42 LWLF 24 B 52 LWLG 12 B 52 LWLFG 24 B 67 LWLC 15 B 42 47 LWLFC 30 B 45.5 50 LWL 15 B 52 57 LWLF 30 B 59.5 64 LWLG 15 B 67 72 LWLFG 30 B 78.5 83 LWLC 20 B 48 53 LWLFC 42 B 51.5 56 LWL 20 B 60 65 LWLF 42 B 65 70 LWLG 20 B 78 83 LWLFG 42 B 84.5 89 LWLC 25 B 63.5 74 LWL 25 B 87.5 98 LWLG 25 B 107.5 117...

Open the catalog to page 8
Rail Guide Type Endless linear motion C-Lube Linear Way ML - Linear Way L - 9

Precaution for Use Mounting surface, reference mounting surface and general mounting structure When mounting the ML(F) series and LWL(F) series, properly align the reference mounting surfaces B and D (D1 or D2)of the track rail and slide unit with the reference mounting surface of the table and bed before xing them. (See Fig. 2) Reference mounting surfaces B and D (D1 or D2) and mounting surfaces A and C are precisely ground. By machining the mounting surface of the mating member, such as machine or device, to high accuracy and mounting them properly, stable linear motion with high accuracy...

Open the catalog to page 9
Rail Guide Type Endless linear motion C-Lube Linear Way ML - Linear Way L - 10

Mounting Bolt Table 16 Shoulder height and corner radius of the reference mounting surface For LWL(F) series, track rail mounting bolt of slide unit and tapped rail specication shown in Table 17 and Table 18are . available. If these parts are necessary, please contact あ Table 17 Cross-recessed head screw for precision equipment Mounting part of track rail unit: mm Identication number Corner radius R1 Maximum Corner radius R2 Maximum Mounting part of track rail unit: mm Bolt size d Table 18 Hexagon socket head bolt t Mounting part of slide unit Mounting part of slide unit unit: mm Bolt size d

Open the catalog to page 10
Rail Guide Type Endless linear motion C-Lube Linear Way ML - Linear Way L - 11

C-Lube Linear Way ML Standard type Identication number Slide unit Dimensions of track rail mm Dimensions of slide unit mm Static moment rating Bolt sizeR Basic dynamic Basic static load rating 5 load rating 5 Appended mounting bolt for track rail 2 mm Track rail lengths L are shown in Table 3.1 on page -10. Track rail mounting bolts are not appended. 3 Prepare screws according to mounting structure. 4 Choose screws whose dimension allow xing thread depth into track rail R to be less than H4. 5 The direction of basic dynamic load rating (C), basic static load rating (C0), and static moment...

Open the catalog to page 11

All IKO Nippon Thompson Europe catalogs and technical brochures

  1. BSP/BSPG/BSR

    14 Pages

  2. MV

    6 Pages

  3. CG2?CGL

    2 Pages

  4. AF2

    2 Pages

  5. New Products

    16 Pages

  6. Cam Followers

    33 Pages

Archived catalogs