E-ChainSystems® - igus® - #50

Text version of the page

5.50 Unsupported System E4 E-Chain® E-Chain®, side-mounted, supported - System E4 Short travels with or without support igus® E-Chains® placed on their side can be used unsupported to a limited extent. length" in this case is dependent on the following factors: Fill weight Bending radius Parallel placement. The greater the fill weight of the E-Chain unsupported length. When placed on its side, the E-Chain® width, in effect, becomes "height" increases, the E-ChainSystem® becomes proportionally more stable. greater stability. If further movement in a second axis is added to the parallel unsupported length is impaired. For applications with low fill weight, the standard adequate. If, however, the fill weight is high and the travels are long, the E-Chain either in whole or in part. Due to the variety of application possibilities, we strongly use of our consulting services. Phone+49- (0) 22 03-96 49-800 Fax +49- (0) 22 03-96 49-222 igus® GmbH 51147 Cologne Internet: www.igus.eu E-mail: info@igus.de igus® E- More application-examples for side-mounted applications visit our homepage System E4/light - E-Tube in direct chip area Standard values for unsupported lengths, side-mounted, upon request. The unsupported lengths can be extended by supporting the links next to the mounting brackets