cranes - igus® E-ChainSystems® for cranes - igus® - #9

Text version of the page

Additional widths l System P4 in 5 widths l 250 300, 350 and 400 mm inner width l AUTO-GLIDE version for all widths l Crossbars in cable friendly, rounded plastic l Safe due double lock mechanism More bending radii l System P4 in 3 bending radii: 250, 300 and 350 mm l Large radii for stiff cables and hoses l Small radii for limited space 16 17 product design award Long-life rollers l Tribo-optimized plastic rollers for all P4 systems l Wear optimized l Long cycle life l Improved rolling l Lower noise and vibration l Same pitch for roller links/chain links Standard guide trough system l Guide trough system l Special geometry in combination with AUTO-GLIDE cross bars allows for offset upper and lower run l Strong installation kits for long life l Stainless trough segments resist corrosion and sea water Extension link – heavy fill weights l Roller extension link for series P4.56 l 50% higher fill weight possible l Increased unsupported span l Maximum rigidity l Divides cross section into reasonable compartments (electric/hydraulic) 1 2 * A reduction of 3 dB(A) sounds like a 50 % reduction in the noise level to the human ear. 0 1999 2004 2008 2828R 3838R 4040R 5050R v m/s 4040RHD 5050RHD P4.56 P4.86 15 10 5.0 1.0 Technical data: Modular P4 system for very long travels and high speed: l 800 m travels and more are possible l >10 m/s speed l Heavy fill weight up to 10 kg/m l Large rolling and gliding surfaces for long cycle life l Safely on track through AUTO-GLIDE cross bars and guide trough l Same pitch for roller links/chain links 0 P4.56R dB(A) 90 88 86 84 82 80 78 76 4040R Noise level* Travel speed igus® Rol E-Chain® 1) First Rol E-Chain® from 1999, Lab test, v = 2,0 m/s 2) Outdoor test, v = 6,0 m/s each 1 m measurement distance The igus® P4 roller Energy Chains® are the best solution for the longest travel at high speeds. They are very smooth running and energy-efficient – requirements that are demanded today by many crane makers and operators. NEW: Now the aluminum guide trough range has been expanded for the series P4.32 and P4.42. l Smooth, low noise operation through identical pitch length for links with and without rollers l Grooved roller running on continuous, plain surface l Large glide area for rollers l Rollers are integrated in to side link Inner height hi [mm] 56 80 56 Outer height ha [mm] 84 108 84 Inner width Bi [mm] 200 - 400** 200 - 400** 200 - 400** Outer width Ba [mm] 270 - 470 276 - 476 270 - 470 Bending radii R [mm] 250 - 350** 250 - 500** 250 - 350** Max. travel [m] 800 800 800 Max. speed [m/s] 10 10 10 Pitch [T] 91 100 91 Max. Load [kg/m] 20 30 30 Part No. P4.56R.Bi. .0 P4.80R. Bi. .0 Extension links P4.56R.Bi1/Bi2/Bin. R R R ** More sizes upon request. Large modular tool box system of P4 Rol E-Chain® NEW: P4.32 with new ALU guide trough l Energy-efficient solution for long travels: -57% l Highly dynamic even in cramped installation kit l Very quiet, lightweight and slim design l For fill weights up to 10 kg/m l For long travels up to 800 m l No split roller, but as offset runs smoothly Safe 57% energy with the new ALU guide trough 24 h or today www.igus-cranes.com/p4video www.igus-cranes.com/p4 P4: safe power long travels