Hazardous dust areas Category 3D(zone 22 – non-conductive dusts)Hazardous dust areas
3-wire Pt100 class B, ATEXclassification II 3D, 3 m silicone cable.
II 3D IP 67 T 100 °C XPt100 sensor element
Direct connection to control
monitors, AS-i modules and Plcs.
Thecompany Dimensions[mm] Measuringrange[°C] Material sensor Connection Sensorelement Accuracyclass Dynamic responsetime T05 / T09[s] Orderno.
Protection rating IP 67 for different
applications and measuring ranges.
Category 3D · II 3D IP 67 T 100 °C X · Protection rating IP 67
General
information Ø 5 mm-20...803 m, silicone cablePt1006 / 18 stainl. st. (320S17) B TS335A
Inductive sensors Capacitive sensors Electronic
cylinderswitches Fail-safeinductiveswitches Temperature sensors in hazardous areas Accessories Control monitor* with integrated display The temperature sensor monitors temperatures inhazardous areas of -20...80 °C. The Pt100 measuring
element to DIN EN 60751 corresponds to the accuracy
class B. It is integrated in a stainless steel housing
(320S17). Using a wirable connector the sensor can be
connected to a standard control monitor type TR instal-
led outside the hazardous area. The measured value is
then indicated on an LED display that is clearly visible at
greater distances. Depending on the control monitor the
measured value can be provided as analogue value
(0...10 V/ 4...20 mA) or as a binary switching signal for
further processing.
Type Description Orderno. Setting rangeswitch point[°C] Analogue outputresolution[°C] Display andswitching status U
b Currentconsumption[mA] I
load Orderno. [V] [mA]
Inductivesensorsfor valves Clamp, Ø 34 mm E10193 M12 connector · output function 2 x -39.5...150–3 digits, 7 segments, 2 x red18...30< 50250 TR7430 M12 connector · output function 4 x
Evaluationsystems Protective cover E30006 -39.8...150–4 digits, 10 segments, 4 x yellow18...28< 90< 500 TR8430 M12 connector · output function 4...20 mA or 0...10 V -39.8...3000.14 digits, 10 segments, yellow20...30< 55250 TR2432
Flow sensors Clamp fitting Ø 6 / 8 / 10 mm –G 1/2 for temperature sensors TS / TT E30018 *The control monitors are only allowed for operation outside hazardous areas.
Connection options The connection to existing control monitors is just as
requested as the connection to PLCs or AS-i modules.
The indicated Pt100 temperature sensor can be directly
connected to AS-i modules with Pt100 inputs.
Industrial pressure sensors Connectors and splitter boxes
Type Description Orderno.
Common technical data ofthe control monitors
Temperature
sensors M12 connector
4-pole, wirable E11504 Electrical design: DC PNP(TR2432: NPN/PNP)
Switch point accuracy: ± 0.2 K
(TR2432: ± 0.3 K)
Accuracy of the analogue output (only
TR2432): ± 0.3 K
Resolution of the switching output: 0.2 °C
(TR2432: ± 0.1 K)
Resolution of the analogue output (only
TR2432): ± 0.1 K
Operating temperature: -25...70 °C M12 connector5-pole, wirable E11506
Networking
AS-interface Connectors For scale drawings and connection diagrams please seewww.ifm-electronic.com
Technical
informationand customerservice Visit our website: www.ifm-electronic.comVisit our website: www.ifm-electronic.com
5756