WM44-SS_EN
2Pages

{{requestButtons}}

Catalog excerpts

WM44-SS_EN - 1

TECHNICAL FEATURES Electrical features References electronics Power supply 24 Vac, 50-60 Hz (not isolated) 0106030601 WM44-SS V3 24 Vac Other devices of WM44 V3 range Type of input signal Square, triangular or sinusoidal (1-750 Hz) Powered by WM44-SS Input impedance For connection with Anemo4403 or Namur: 1000 ohm Sensors admitted Anemo4403 V3 sensor -3 wire sensor -Namur -Direct external signals are not supported. General features Dimensions Ver planos Electronics at the service of industry Compatible anemometers Measurements Accuracy (100Hz=100km/h) +-1 (km/h) Maximum measurable speed 99 km/h / 99 MPH WM44-SS V3 *For other references, please contact us. WM44 V3 range of IED Electronics. Anemometer display with alarms. IED Electronics Solutions S.L. Pol. Plazaola E 6, 31195 Aizoain. Navarra (Spain) www.iedelectronics.com info@iedelectronics.com WM44-SS V3 have a 2-digit wind speed reading in km/h or MPH. Choosing one of the 2 options is possible at any time by pressing “SELECT”. It admit 2 and 3 wire sensors and have a 10-20 Vdc power output. Wind speed display with 2 alarms Pre-configured to work with Anemo4403 V3 pulses output sensor Adjustable pre-alarm and alarm Panel version 36x72 mm CA-0106030601 (26/01/2018) All dimensions and sizes are approximate. Specifications and prices are subject to change without notice.

Open the catalog to page 1
WM44-SS_EN - 2

P00 Display Wind speed data displayed on a 2-digit 20mm display. 2 alarm enabled indicator LEDs (AL1 and AL2). Wind speed can be displayed in km/h or MPH and can be selected in any moment by pressing "select" button removing the cover. Alarms The alarm is triggered when the wind speed reaches or exceeds the programmed value. It includes a delay to prevent the alarm from being triggered by gusts of winds. The alarm is deactivated when the wind speed drops below the programmed value. It also has a delay to prevent the alarm from being deactivated by temporary periods of low-intensity wind....

Open the catalog to page 2

All IED COMPANY catalogs and technical brochures

  1. WIND VANE

    6 Pages

  2. WM-44 SS V3.

    3 Pages

  3. ANEMO5H25 V3

    2 Pages

  4. VT

    2 Pages

  5. AI-2

    2 Pages

  6. SRR4

    2 Pages

  7. SRR4 868

    2 Pages

  8. WM44_EN

    2 Pages

  9. WM44-P_RF_EN

    2 Pages

  10. SAG-105WR_EN

    2 Pages

  11. WM44-EVO_EN

    2 Pages