Katalog FL1E
16Pages

Think Automation and beyond... IDEC CORPORATION

FL1E Small LCD panel supports 10 languages Scrollable messages and characters of various languages provide more flexibility. • English, Japanese, Chinese (GB-2312), German, French, Italian, Turkish, Dutch, and Russian characters available • Backlight time can be set. • Adjustable contrast • 50 screens with a maximum of 48 characters per screen can be displayed. Digital/Analog Input Eight digital inputs: 4 high-speed digital (I3 to I6) with up to 5 kHz response frequency and 4 digital/analog compatible (I1, I2, I7, I8) (Applicable models: FL1E-H12RCE/FL1E-B12RCE/FL1E-H12SND) Control Buttons...

Concept Replaces relays, timers, and counters The FL1E IDEC SmartRelay contains various functions such as timers, counters, and a calendar. No complicated wiring is required. Just use the buttons and the LCD panel to write programs. System changeover that requires parameter changes can be completed easily. Smaller system than using a PLC Sensor Reduces your workload Solenoid Valve Change your complicated system of multiple relays, timers, and counters to a single IDEC SmartRelay. The IDEC SmartRelay replaces many functions of peripheral equipment of the programmable logic controller....

Application Examples solutions for Smart engineers! A wide variety of applications using analog values. Pulse Width modulator (PWM) Analog input value (Ax) is modulated to pulsed digital output signals. Heater is controlled to maintain the temperature inside a green house. When the temperature decreases to 20°C and below, a digital output is turned on to start the heater. Ventilation Fans inside the control panel) t Pulse Width Modulator (PWM) Four analog parameters are used for arithmetic operation to Analog math and analog error detection obtain the ana|0g solution. The average value of...

Replaces timers and counters. Control of equipment and system incorporating various controls is made possible. Timing control for a water sprinkler and fountain system The IDEC SmartRelay can replace weekly timers for controlling the timing of water sprinklers and fountains. The duration of the water flow can be changed depending on the hour, and the clock can be rewritten by using the buttons on the FL1E. Reducing mounting space and cost. (outputs expandable) Water Sprinkler Data acquisition system of machine operating hours With an operating hours counter function, the current counter...

Wide variety of modules for various combinations provides for flexibility and versatility. Base Module & Expansion Modules Power Voltage DC input: 8 points (PNP) (Analog 4 points) DC input: 8 points (PNP) (Analog 4 points) AC/DC input: 8 points (PNP/NPN input) AC/DC input: 8 points (PNP input) Relay output: 4 points Transistor output: 4 points Relay output: 4 points Relay output: 4 points Programming Function Clock Function With (Note) Note: FL1E-H12SND of Ver. 4 and before does not have clock function. Power Voltage DC input: 8 points (PNP) (Analog 4 points) AC/DC input: 8 points (PNP/NPN...

AS-Interface Communication Module FL1B-CAS2 System Configuration Example The AS-Interface communication module provides an optimum solution for savings in cables, installation space, and wiring cost and the possibility for decentralized control. Open Network (CC-Link, DeviceNet) • Virtual I/O points: 4 input points, 4 output points. • FL1B-CAS2 is compatible with ASInterface Ver. 2.0. Branch Connector PS2R AS-Interface Power Supply SX5A IP20 Manifold Solenoid Communication Terminal Value Sensor (AS-Interface Light Tower Direct Connection Type) AS-Interface Communication Module Combination...

Programming Software WindLGC reduces development and debugging time of simple and complex programming WindLGC Ver. 6.* Programming Software for IDEC SmartRelays WindLGC features user-friendly debugging functions such as simulation and online test functions. Not only writing programs but also configuring, confirming, changing the messages on the base module and text display can be completed. Programming Programs can be configured using the drag-anddrop method quickly and easily. Function Block Programming Function block parameters are entered and modified in the function block dialog boxes....

Improvement of function blocks 1 Improvement of function blocks 2 When using simulation or online test on WindLGC, changes of analog output values (AQ), current values (PV), and set-values (SP) can be shown in a trend graph for easy monitoring of the changes. Sampling period can be also chosen in one-second increments, so that the chronological changes can be confirmed accurately and more easily. The addition of function blocks that can be set as parameters makes it possible to achieve optimization of the entire program and flexible programming through the coordination of function blocks...

FL1E New IDEC SmartRelay with enhanced performance and visibility! Advanced features enable pulse width modulation (PWM) and analog maths functions. • A maximum of 200 function blocks can be programmed, including 27 internal relays, 50 message displays, and an unlimited number of timers and counters to achieve powerful control operations (program capacity 3,800 bytes). • 10A relay outputs eliminate the need for external relays. • Expandable up to 24 digital inputs, 16 digital outputs, 8 analog inputs, and 2 analog outputs. • AS-Interface and LONWORKS® communication modules enable...

FL1E Base Module Specifications Base Module Type No. Rated Power Voltage Allowable Voltage Range Power Supply Rated Frequency Current Draw Allowable Momentary Power Interruption Power Consumption 80 hours (Note 1) (Note 5) Clock Accuracy ±5 sec/day maximum (Note 5) Input Signal Input Points Analog Input Points High-speed Input (Note 2) 4 (I3, I4, I5, I6), 5 kHz maximum 0 to 10V DC (max. rated input: 28.8V DC) ±1.5 (of full scale) 4 (I3, I4, I5, I6), 5 kHz maximum 0 to 10V DC (max. rated input: 28.8V DC) ±1.5 (of full scale) Analog Input Error Analog Input Resolution Reverse Polarity...