Catalogs >
IDEC >
High Performance

High Performance
4Pages

Catalog excerpts

High Performance OI Touchscreens New 8.4”, 10.4” and 12.1” Color TFT LCD Displays with Multi-Media Mounts Portrait or Landscape Remote Access, Monitor and Control Audio and Video Interface (8.4”, 10.4”, 12.1”) Supports Expansion I/O Modules Serial, Ethernet and USB ports Display Type Color Depth Portrait or Landscape Mounting User Memory Display Resolution Backlight Backlight Life *1 Brightness Adjustment MicroSmart Digital I/O Cards Supported Ehternet Port Serial Ports Composite Video RCA connector (NTSC or PAL) Composite Video RCA connector (NTSC or PAL) Composite Video RCA connector (NTSC or PAL) Audio In/Out 3.5mm audio mini-jack (Stereo) 3.5mm audio mini-jack (Stereo) 3.5mm audio mini-jack (Stereo) Remote Monitor & Control *1 The backlight life refers to the time until the surface brightness reduces by half after continuous use at 25°C. *2 Brightness of the LCD only.

Open the catalog to page 1

General Specifications 5.7" Model Rated Power Voltage Power Voltage Range Power Consumption 19W maximum 10W maximum when not using USB interface (USB2) or expansion module interface (EXT) 25W maximum 15W maximum when not using USB interface (USB2) or expansion module interface (EXT) 27W maximum 18W maximum when not using USB interface (USB2) or expansion module interface (EXT) 1,000V AC, 10 mA, 1 minute between power and FG terminals 1,000V AC, 10 mA, 1 minute between power and FG terminals 1,000V AC, 10 mA, 1 minute between power and FG terminals 10 MΩ minimum between power and FG...

Open the catalog to page 2

Touchscreen Part Numbers 5.7" Light gray Panel Cut-out Panel Cut-out Panel Cut-out Panel Cut-out

Open the catalog to page 3

Accessories Part Number Programming Software Automation Organizer USB Programming Cable USB-miniB (2m) Host Communication Plug Replacement clips (min. 10 pcs) (4 pcs are supplied with HMI) Mounting Clip Replacement clips (min. 10 pcs) (4 pcs are supplied with HMI) Replacement terminal block plug. (1 is supplied with HMI) Replacement terminal block plug. (1 is supplied with HMI) Replacement Battery Lithium battery CR2032 (one battery is supplied with HMI) Used to lock USB cable (for USB2). USB panel-mount extension cable Memory Card Protective Cover Use with 5.7” HMI. Covers entire front of...

Open the catalog to page 4

High Performance 4Pages

Catalog excerpts

All IDEC catalogs and technical brochures

High Performance
4Pages