DC Planet Gear Motor
6Pages

{{requestButtons}}

Catalog excerpts

DC Planet Gear Motor - 1

I.CH DC Planet Gear Motor I.CH MOTION CO., LTD MOTION WORLD I.CH MOTION supply a complete range of DC gear motor. Our micro DC geared motor uses standard DC motor. Diameter of gearbox is from 12 to 37mm , and pear sharp diameter is 48mm . Voltage is from 1.5V to 24V; Power is under 10W; Speed is from 1 to several tens rpm, and Torque is under 30kg .cm. Structure and Characteristic of DC motor DC motor we use has good electric and mechanical performance. Because of volume and metal brush commutator limit, the speed of DC motor is between 3000 to 12000 rpm normally. Faster speed will decrease motor life. Low noise DC motor with ring varistor inside is adopted, which can decrease electromagnetic disturbance to environment. DC motor life is depending on mechanical and chemical wear of metal brush and commutator. It can continuously run over 300 to 500 hours within rated load and speed. The load torque of DC geared motor has direct relationship with speed and current. When the load increases, the speed linearly decreases and the current linearly increases. So the geared motor has better working near maximum efficiency, then it can obtain ideal running performance, working life and stable characteristic. In general, the working environment of DC geared motor is the same as DC motor. If there are any special requirement, such as environment temperature, overload, and current limit, please illuminate in advance. Working life of gearbox usually longer than DC motor, it can reach 1000 to 3000 hours. Entire reduction ratio of gearbox is between 1: 10 and 1: 500. It can reach 1: 1000 with special design. However, the gearbox with bigger reduction ratio is not allowed “counter rotation”, which means the output shaft of gearbox cannot be the driving shaft and counter rotated forcedly. The gearbox is combined with multi-pair of gears. Every pair includes gear wheel and pinion which is joggled one another. The first pinion is mounted on the motor shaft of DC motor. The bearing of gearbox output shaft is usually oil bearing made of brass or iron. Product Number Code For DC Gear Motor 010= 1:10 , 300= 1:300 180 = 18kg.cm , 012=1.2kg.cm 2= DC Spur Gear Motor , 3= DC Planetary Motor Dimension of gearbox : 12,16,20,25,37 – Dia.of gearbox 12,16,20,25,37mm 48 – Dia. Of pear sharp 48mm, 36(42) – Wideth of rectangle sharp 36(42)mm) D

Open the catalog to page 1
DC Planet Gear Motor - 2

DC PLANETARY GEAR MOTOR APPLICATION ATM in Bank, Automatic window bind, Medical instrument, Cosmetology instrument, IT Mechanism, Security cameras GEARBOX MOTOR SPECIFICATION Type D163 Instantaneous Kg.cm torque Allowable torque MOTOR DATA Frames volt (V) 1B7K5‐12 Rated torsion (g.cm) 9 Raterd speed (rpm) 6130

Open the catalog to page 2
DC Planet Gear Motor - 3

DC PLANETARY GEAR MOTOR ATM in Bank, Automatic window bind, Medical instrument, Cosmetology instrument, IT Mechanism, Security cameras GEARBOX MOTOR SPECIFICATION Type Allowable torque MOTOR DATA Frames volt (V) 1A8K4-12 Noroad current Rated torsion (mA) (g.cm) 95 21 Raterd speed (rpm) 6600 MOTOR CHARACTE

Open the catalog to page 3
DC Planet Gear Motor - 4

DC PLANETARY GEAR MOTOR ATM in Bank, Automatic window bind, Medical instrument, Cosmetology instrument, IT Mechanism, Security cameras GEARBOX MOTOR SPECIFICATION Type Instantaneous Kg.cm torque Allowable torque MOTOR DATA Frames volt (V) 3A7K8-24V No road speed Noroad current (rpm) (mA) 7800 100 MOTOR CHARACTER

Open the catalog to page 4
DC Planet Gear Motor - 5

DC PLANETARY GEAR MOTOR ATM in Bank, Automatic window bind, Medical instrument, Cosmetology instrument, IT Mechanism, Security cameras GEARBOX MOTOR SPECIFICATION Type Allowable torque Gearbox Kg.cm Kg.cm MOTOR DATA Frames volt (V) 3A7K8-24V

Open the catalog to page 5
DC Planet Gear Motor - 6

DC PLANETARY GEAR MOTOR ATM in Bank, Automatic window bind, Medical instrument, Cosmetology instrument, IT Mechanism, Guard aqainse fheft-vidicon GEARBOX MOTOR SPECIFICATION Type D363 Rated speed rpm Instantaneous Kg.cm torque Allowable torque MOTOR DATA Frames volt (V) 5N3K8-24V

Open the catalog to page 6

All I.CH MOTION CO. catalogs and technical brochures

  1. D202A1

    1 Pages

  2. D252A4

    1 Pages

  3. D362

    1 Pages

  4. D372B3

    1 Pages

  5. D482G2

    1 Pages

  6. H571

    2 Pages

  7. HP281

    1 Pages

  8. H1101,1106

    1 Pages

  9. HS561

    1 Pages

  10. HS601

    1 Pages

  11. HS861

    1 Pages

  12. H364

    1 Pages

  13. H391

    1 Pages

  14. H392

    1 Pages

  15. H421

    1 Pages

  16. PM STEP MOTOR

    10 Pages