System Management IBC-2501 - IBus - #1

Ml

www.ibus.com

IBC-2501

Ordering Informatico

Specificatio

Features

6U CompactPCI ® rear I/O form factor Hot-plug 2mm metric connector Fully PICMG 2.9 R1.0 IPMI compliant System controller independent Audible alarm Battery backup Quad I²C on-board interfaces Dual RS-232 serial ports Up to 8 temperature sensors (8- bit) 7 Voltage sensors 6 User digital I/O (3 in, 3 out)

3 Relay outputs

4 LED display

I²C Interfaces

• 1 routed to IPMB0 on backplane

• 1 routed to temp sensors

• 2 available via on-board headers

Serial Interfaces

• Two rear panel DB-9 connectors

• Two internal 5-pin headers

• Control and communication from host SBCs

Voltage Sensors

• Monitors +3.3V, +5V, +12V, -12V

• Monitors up to 2 -48V inputs

• On-board battery (6V) monitor

• 10-bit resolution

Relay Contacts

• Rear panel DB-15 connector

• .25A, 175V relay contacts

• Critical, major and minor relays

Optional Battery Backup

• Optional on-board 6V backup battery

• 10 minute CMC back-up

Digital I/O

• Rear panel female DB-9

• 3 TTL user inputs

• 3 TTL user outputs

LED Display/Push Buttons Critical alarm red LED Major alarm orange LED Minor alarm yellow LED CMC reset push-button Audible alarm cut-off (ACO) push-button LED test push-button

Software

• On-board firmware supports sensor threshold monitoring alarm and IPMI command interface

• SNMP host software agents available

General Specifications

• Dimensions: 6U x 4HP x 80mm

• Power Requirements: +12V, 400mA

• Operating Temperature: 0 to 55°C

• Storage Temperature: -40 to +85°C

• Design Compliance: UL, CSA, FCC, CE, NEBS

01-12-05 Rev.F