VISION Pipettors_EN - IBS - INTEGRA Biosciences - #3

Storing and/or recharging Vision pipettors is simple and convenient using Viaflo's specially designed charging stands. Single pipettor or 4-position stands are available—see back cover for complete ordering details.

Vision pipettors can be programmed by selecting from predefined modes (see right) or by creating custom multi-step protocols that can be stored in memory.

Predefined programs allow you to define parameters for each step, including volume, speed, pace, etc.

Allows liquid transfers when aspirate and dispense volumes are equal and a blowout is desired.

Allows dispensing multiple aliquots of the same volume. Simply select the volume and number of dispenses.

Allows aspirating two liquids separated by an air gap followed by a complete dispense and blowout.

Allows liquid transfers when aspirate and dispense volumes are equal followed by a Mix step.

Allows manual control and measurement of aspirate and dispense volumes.

Allows liquid transfers when aspirate and dispense volumes are equal and a blowout is not desired.

Allows dispensing multiple aliquots of different volumes.

Allows aspiration of multiple different volumes.

Allows aspirating two liquids separated by an air gap followed by a complete dispense and Mix step.

Allows aspirating a transfer volume followed by a mix. Rows and Mix Cycles are tracked on the display.

Custom programs can contain up to 50 individual steps built upon four basic functions:

•Aspirate ^Dispense

•Mix »Purge

To build your program, simply scroll through the menus, select functions and define parameters. Up to 10 custom pipetting protocols can be created and stored in the pipettor's memory.