MEDIAJET_EN - IBS - INTEGRA Biosciences - #8

Text version of the page

Ordering information 103099_V05_Flyer_MEDIAJET_EN INTEGRA Biosciences AG CH-7205 Zizers, Switzerland Phone: +41 81 286 95 30 Fax: +41 81 286 95 33 info@integra-biosciences.com www.integra-biosciences.com Accessories (continuation of previous page) Part No. Blood agar preparation Tubing set for blood agar suitable for adding 3 to 10% blood in connection with the INTEGRA 103 040 peristaltic pump DOSE IT. Includes filling nozzle for Ø 90 mm Petri dishes, tubing for media (6 mm inner diameter) and additive (2 mm inner diameter), glass T-piece, suction needle stainless steel DOSE IT P910 peristaltic pump for preparation of blood agar 171 000 Interface cable for connection of MEDIAJET to DOSE IT 103 047 Tubefiller option TUBEFILLER option for MEDIAJET including filling arm, support plate compatible with racks of Ø 13, 16, 20, 25 103 010 or 30 mm test tubes and a 2.5 m (3 mm inner diameter) silicone tubing set with dispensing/aspiration and tube collar Test tube racks (10 units, for Ø 13 mm test tubes, 6 x 15 capacity 103 070 for Ø 16 mm test tubes, 5 x 12 capacity 103 071 for Ø 20 mm test tubes, 4 x 10 capacity 103 072 for Ø 25 mm test tubes, 3 x 8 capacity 103 073 for Ø 30 mm test tubes, 3 x 7 capacity 103 074 Centring plate (required to for Ø 16 mm test tube rack 103 065 for Ø 20 mm test tube rack 103 066 for Ø 25 mm test tube rack 103 067 Dispensing tube for silicone 10 cm length, 2.0 mm inner diameter, stainless steel 171 042 10 cm length, 3.0 mm inner diameter, stainless steel 171 043 10 cm length, 4.0 mm inner diameter, stainless steel 171 044 Aspiration tube for silicone 10 cm length, 2.0 mm inner diameter, stainless steel 171 052 10 cm length, 3.0 mm inner diameter, stainless steel 171 053 10 cm length, 4.0 mm inner diameter, stainless steel 171 054 Tube collar as weight for aspiration tubes with 1-3 mm inner diameter 171 071 for aspiration tubes with 4-6 mm inner diameter 171 074 Consumables Part No. UV lamp TUV11W to reduce the risk of contamination during the filling process 103 705 Silicone tubing for Petri dish filling, 25 m bulk roll (6 mm inner diameter, 1.5 mm wall thickness) 171 036 for TUBEFILLER option, 25 m bulk roll (2 mm inner diameter, 1.5 mm wall thickness) 171 032 for TUBEFILLER option, 25 m bulk roll (3 mm inner diameter) 171 033 for TUBEFILLER option, 25 m bulk roll (4 mm inner diameter) 171 034 autoclavable (max. 121°C) polypropylene racks) provide an accurate positioning of Ø 16, 20 or 25 mm test tubes, which are longer than 15 cm) tubing as end-piece nozzle tubing as suction nozzle for aspiration tubes See product pictures on www.integra-biosciences.com