cad
  • Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

PMEC / AMEC ? 3 Position Controllers for ROBO Cylinder - 32 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

Catalogue excerpts

3-POSITION CONTROLLER FOR ROBO CYLINDER HOME Accel & Speed Setti ng

 Open the catalogue to page 1

HOME Accel & Complete Speed Setti Speed Setti 3-position Controller for ROBO Cylinders Mechanical Engineer Control (MEC) Affordable and Easy to Use The MEC allows users, including mechanical engineers, to easily operate IAI's ROBO Cylinders, which are highly recognized in the FA industry for their wide selection of models and superior performance. Just by plugging in the power and setting the speed and acceleration, you can start using the MEC just like an air cylinder, by inputting the Forward and Back signals from the PLC. The PMEC comes complete with a controller, power supply, acceleration...

 Open the catalogue to page 2

ROBO Cylinder ROBO Cylinder 3. Versatile 3. Versatile You can set the speed and the speed and acceleration/deceleration You can set acceleration/deceleration to any value within the specifications specifications of each to any value within the of each actuator. actuator. You can control not only 2-positiononly 2-position stops, but also You can control not stops, but also 3-position stops when you use when you use the optional 3-position stops the free MEC-dedicated PC software. In addition, you can MEC-dedicated PC software. In addition, you can set any start and end positions within the stroke....

 Open the catalogue to page 3

Anyone can set up and use the MEC, even without any electrical knowledge. Connect the wiring (see page 17). Green :Normal Red: Alarm Accel & Speed Setting Verify proper operation. Press and hold the MANUAL button for at least 1 second. Press the HOME button to prepare for operation. Check for safety and press the RUN button for a test run. (The Complete LED turns on when the home is complete.) Normal Release Brake With just these steps, the operation (Continuous Operation) starts. Follow the steps below to change the acceleration and speed settings. You can do these steps even during continuous...

 Open the catalogue to page 4

SupportedSupported Actuators Actuators A versatile versatile lineup of ROBO Cylinders, from mini models models A lineup of ROBO Cylinders, ranging ranging from mini similar to air cylinders, to rotary to rotary andtypes. types. similar to air cylinders, and gripper gripper Actuators Supported Supported by Actuators by Mini ROBOMini ROBO Cylinders Cylinders RCP3 Mini Slider Type RCP3 Mini Slider Type RCP3 Mini Rod Type RCP3 Mini Rod Type RCP3 Mini Table Type RCP3 Mini Table Type Motor Unit Coupling Type Unit Coupling Type Motor Reversing Type Motor Motor Reversing Type Motor Unit Coupling Type...

 Open the catalogue to page 5

ROBO Cylinder MEC Kits ROBO Cylinder MEC Kits What are ROBO Cylinder MEC Kits? Available for slider and rod types of electric actuators, the ROBO cylinder MEC kit is a set of IAI's most recommended equipment that meets specific speed and load capacity requirements. The MEC kit is a good option if you are not sure which model to choose from the wide range of selections. There are many other types of ROBO Cylinders besides those that are available in the MEC kit. For details, refer to the ROBO Cylinder General Catalog. Controller Type MEC Slider Kit (Horizontal Type) This kit is suitable for horizontal...

 Open the catalogue to page 6

100mm/s 300mm/s 400mm/s Low speed Medium speed High speed [Speed] [Load Capacity] 100mm/s 250mm/s 50mm/s Medium speed High speed Low speed [Speed] [Load Capacity] Slider (Vertical) [Load Capacity] 100mm/s 200mm/s 400mm/s Low speed Medium speed High speed [Speed] [Load Capacity] Slider (horizontal) Rod Type (Horizontal) 50mm/s 100mm/s 150mm/s Low speed Medium speed High speed [Speed] Horizontal Load Capacity Less than 10 kg Medium speed High speed Vertical load capacity Less than 3 kg Vertical load capacity Less than 5 kg Medium speed High speed Medium speed Horizontal Load Capacity Less than 20...

 Open the catalogue to page 7

ROBO Cylinder MEC Kits ROBO Cylinder MEC Kits Selection procedure Select the MEC kit that is right for you. Once you have decided on the pattern, select the kit according to the desired speed and stroke. Place your order by the kit number. if each workpiece transported weighs less than 5kg, or Horizontal load capacity Controller Type Controller Type High Speed* (400 mm/sec) Controller Type * This speed cannot be attained if the stroke is 750 mm or more. 1 A placeholder for the value of the desired stroke.

 Open the catalogue to page 8

MEC Slider Kit (Horizontal Type) [Load Capacity] Ordering Example: If load capacity = 5kg, speed = medium speed (200mm/sec), and stroke = 300mm, the kit number to order is SA-2-300. Horizontal load capacity Controller Type Controller Type * This speed cannot be attained if the stroke is 700 mm or more. High Speed* (400 mm/sec) 200mm/s 100mm/s 400mm/s Low speed Medium speed High speed [Speed] Controller Type

 Open the catalogue to page 9

ROBO Cylinder MEC Kits ROBO Cylinder MEC Kits Selection procedure Select the MEC kits that is right for you. if each workpiece transported weighs less than 1kg, if less than 5kg. Once you have decided on the pattern, select the kit according to the desired speed and stroke. Place your order by the kit number. Vertical Load Capacity Controller Type Controller Type Controller Type Stroke Kit Number Speed Controller Type Vertical Load Capacity Controller Type High Speed* (250 mm/sec) Controller Type This speed cannot be attained if the stroke is 650 mm or more. 1 A placeholder for the value of the...

 Open the catalogue to page 10

MEC Slider Kit (Vertical Type) [Load Capacity] Ordering Example: If load capacity = less than 3kg, speed = low speed (50mm/sec), and stroke = 100mm, the bundle package to order is SE-1-100. 50mm/s 100mm/s 250mm/s Low Speed Medium Speed High Speed [Speed] Vertical Load Capacity Speed Actuator Controller Type Controller Type * This speed cannot be attained if the stroke is 750 mm or more.

 Open the catalogue to page 11

ROBO Cylinder MEC Kits ROBO Cylinder MEC Kits Selection procedure Select the MEC kit that is right for you. Once you have decided on the pattern, select the kit according to the desired speed and stroke. Place your order by the kit number. if each workpiece transported weighs less than 10kg, or Horizontal Load Capacity Controller Type Controller Type Controller Type * This speed cannot be attained if the stroke is 300mm or more. 1 A placeholder for the value of the desired stroke.

 Open the catalogue to page 12

All IAI catalogues and technical brochures

  1. Remote I/O Unit

    8 Pages

    En
  2. Maintenance Parts

    40 Pages

    En
  3. ERC3 Series

    56 Pages

    En
  4. DD Motor Catalog

    8 Pages

    En
  5. RCL Micro Slider

    4 Pages

    En
  6. RCP2-RA8C/RA8R

    8 Pages

    En
  7. ISB/SSPA Series

    60 Pages

    En
  8. RCP4W Series

    16 Pages

    En

Archived catalogues

  1. X-SEL P/Q/PX/QX

    2 Pages

    En