cad
  • Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

I-Series Dot-Peen - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

I-Series Dot-Peen Unit Compact industrial integration dot-peen marking system with heavy duty frame and linear rail guidance system to ensure precise operation. The marking speed is 3-5 characters per second. It has a very small foot print with 3 sides available for mounting. These systems come with two marking window options: medium and large size. The I-Mark controller uses the latest in drive technology. Complete marking unit for integration: Pneumatic Dot-Peen Marking Head in two window sizes Model 200 I-Mark Controller I-Mark software for programming (details page 22) Power cable, Marking head cable, Cross over cable, and LAN cable The I-Mark-ID Marking Head: Air and controller connection located on back of marker. Solid aluminum frame with ½” plates on three sides for easier mounting, all pre-drilled & tapped. High torque stepper motors and linear rails for precise positioning. Pneumatic pin with carbide tip to mark materials up to 45 Rc Mountable in any orientation The I-Mark Model 200 controller: Compact design for easy installation into production equipment. Communication options including remote programming over LAN, and operational controls via I/O, Modbus, Serial, Ethernet IP ect. Monitor upgrade and more details page 18. Options: Pedestal mount Upgrades: database and camera integration

 Open the catalogue to page 1

I-Series Dot-Peen Unit I-Series Dot-Peen How to Order To Order: Select only the symbols that represent the marker feature that is needed. Place that symbol in the sequence as shown. Model/Feature Symbol Example I-Mark Integrator Dot-Peen IM-ID IM-ID60-D-X-25 Medium Marking Window 60 Large Marking Window 200 Without Shield With Shield D Standard Pin 2” Extended Pin X 10 ft (3m) Cable 25 ft (7.5m) Cable 25 Utilities: Controller requires 110 VAC power, 6 ft (1.8m) electrical cord supplied Air power required, 8mm push-in tube fitting requires connection to air supply (30-75 PSI operating range) Features:...

 Open the catalogue to page 2

I-Series Silent Scribe "Silent Scribe" version of the popular I-Series Dot-Peen. This ball screw drive system has a marking speed of 4 characters per second in scribe mode. The systems come with two marking window options: medium and large size. This system is UID/2D Square-Dot® Compatible. The I-Mark controller uses the latest in drive technology. Complete marking unit for integration: Pneumatic Scribe Marking Head in two window sizes Model 200 I-Mark Controller I-Mark software for programming (details page 22) Power cable, Marking head cable, Cross over cable, and LAN cable The I-Mark-IS Marking...

 Open the catalogue to page 3

I-Series Silent Scribe I-Series Scribe How to Order To Order: Select only the symbols that represent the marker feature that is needed. Place that symbol in the sequence as shown. Model/Feature Symbol Example I-Mark Scribe IM-IS IIM-IS60-D-X-25 Medium Marking Window 60 Large Marking Window 200 Without Shield With Shield D Standard Pin 1” Extended Pin X 10 ft Cable 25 ft Cable 25 Utilities: Controller requires 110 VAC power, 6 ft (1.8m) electrical cord supplied Air power required, 8mm push-in tube fitting requires connection to air supply (30-75 PSI operating range) Features: High torque stepper...

 Open the catalogue to page 4

All I-Mark catalogues and technical brochures

  1. Square-Dot®

    1 Pages

    En
  2. Handy Andy

    2 Pages

    En

Archived catalogues

  1. Roll Marking

    24 Pages

    En
  2. Air Impact Marker

    24 Pages

    En