2 mm - Hypertac Interconnect - #1

Text version of the page

2MM Series SEPTEMBER 2006 23 2mm Connectors Interchangeable with cPCI COTS Systems • Hypertac® contacts provide high reliability • Standard 2mm footprint • Immune to shock & vibration • High-temp LCP insulator meets NASA outgassing requirements • Compatible with IEC 1076-4 101 • Press-in/compliant termination is also available for receptacle assembly, consult factory Qualification Testing The 2mm cPCI family of connectors has been flight qualification tested per Mil-DTL-55302, EEE-INST – 002 (NASA Goddard Space Flight Center Document), GEVS-SE, Rev. A, General Environmental Verification Standard for STS & ELV Payloads, Subsystems and Components. Testing included, but was not limited to: Should you require more information, please contact Technical Support. General Specifications 3U / 6U form factor P1 / P4 P2 / P5 P3 J1 / J4 J2 / J5 J3 Part number reference K2A110FMD K2B110FMD K2B95FMD K2B125FMD K2A110FFD K2B110FFD K2B95FFD K2B125FFD Design criteria IEC 1076-4 101 Contact gender Male Pin Hypertac 0.4 mm socket Contact termination Solder tail tin lead (60-40) per Mil-P-81728 Contact spacing 2 mm Number of contacts 110 signal 22 ground 95 signal 19 ground 125 signal 25 ground 110 signal 22 ground (top shield) 95 signal 19 ground (top shield) 125 signal 25 ground (top shield) Contact current rating 1 AMP Temperature range minus -55C to plus + 125C Insulator material 30% Glass Filled LCP (meets NASA outgassing specification) Flammability rating 94 V-O Insulation resistance >5000 megohm Contact material BeCu pin contacts BeCu Hypertac socket wires / brass body Mating contact plating 50 micro inch gold / 50 micro inch nickel Suggested PCB hole diameter 0.7 mm after plating 0.6 mm after plating Weight 15.7 g 15.0 g 12.9 g 12.2 g 10.9 g 10.8 g 8.9 g 12.3 g LLCR: Low Level Contact Resistance DWV: Dielectric Withstanding Voltage CRD: Contact Resistance IR: Insultation Resistance MFG: Mixed Flowing Gas Subject to Export Control Procedure