HySTAT Energy Station - Hydrogenics - #9

/ 12


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
Pages:


See other catalogues for Hydrogenics

Text version of the page
Microsoft Word - Scheda Tecnica E1 standard _eng_.doc
welcome to the évolution of energy
Fuel Dispenser Module Options
Fuel Type Hydrogen
Fuel Type
Customers have the option to dispense pure hydrogen or a blend of hydrogen and natural gas to be used in vehicles with natural gas engines. The HySTÂĎ™ Fuel Dis­penser Module is offered in two dispensing configurations: (1) pure hydrogen or (2) hydrogen and blended hydrogen/natural gas.
Dispensing
The Fuel Dispenser Module is also available with various dispensing pressure options, typically 250 bar (3,600 psi), 350 bar (5,000 psi),
or both 250 and 350 bar. 700 bar (10,000 psi) is available upon request.
Customers also have the option for a fast-fill design (fueling a passenger vehicle in as little as 2-3 minutes or a bus in 15 minutes); or a slow-fill design (fueling a vehicle or bus gradually over a longer period of time).
Customer Interface
The HySTAT™ Fuel Dispenser Module is available with a personal identifica­tion number (PIN), a swipe card or credit card customer interface for fleet and retail fueling applications.
Customers typically require dispens-ers with flow metering, and the data display option that shows the amount of fuel dispensed during use. As well, the data capture option is particularly useful for fleet manag­ers wishing to monitor and optimize their fleet's fuel efficiency.
Dispensing Pressure
Hydrogen & Natural Gas
250 and 350 bar (3,600 and 5,000 psi) Dual Pressure option
250 bar (3,600 psi) 350 bar (5,000 psi) Single Pressures
Fast-Fill
Slow-Fill
Dispensing Type
Customer Interface Personal Identification
Number (PIN)
Swipe Card Credit Card
Additional Options Flow Metering
Data Display Data Capture
* Customized packaging options available upon request
_

pageCatalog pdf di En 2012-05-22-29