PA and PAC pumps, single and twin-flow - Hydro LEDUC - (Version JPG) - PDF Catalogue | Technical Documentation

See other catalogues for Hydro LEDUC

Hydraulic accumulator, Pump, Axial piston pump, Accumulator, Micro pump

Text version of the page



	*Single flow models : from 12 to 114 cc* *Twin-flow models : from 2 x 25 to 2 x 57 cc* *Two different flow models : 75 and 40 cm³* *350 bar continuous pressure 500 bar peak pressure Dual direction of rotation*

		Of unique design, the PA/PAC pumps offer a robust solution with long service life for high pressure requirements in truck hydraulics. Relatively insensitive to contamination, these pumps are particularly well suited to the harshest environments. The (patented) way the pumping elements are arranged means the pumps can rotate either clockwise or anticlockwise without any user intervention. As all LEDUC truck pumps, this range is fitted with the latest innovation in terms of sealing : - front of pump fitted with two shaft seals : externally, a seal capable of resisting high temperatures of the gearbox, and internally, a seal adapted to the hydraulic requirements.	- a transparent flexible tube fitted between the two seals, to protect these seals from dirt from the road, from high pressure water jet during washing of vehicle etc. - O ring between pump and PTO to reinforce liaison between pump and PTO (instead of paper seal). In short, the PA/PAC pumps are : • simple to use ; • capable of withstanding difficult conditions : - pressure peaks ; - slightly degraded fluides ; • an economic solution for twin-flow requirements.

8