Text version of the page

T

S LOPED

APERED

P OLYISO B ONDEDTO

H-S

W OOD

HIELD

F IBERBOARD

-WF

HUNtER PRODUCT DESCRIPTION Tapered H-Shield-WF is a rigid roof insulation panel composed ofa closed cell polyisocyanurate foam core bonded during the manufacturing process to fiber reinforced facers on one side and 1/2”(12mm) asphalt coated high density wood fiberboard on the other side. Tapered H-Shield-WF is designed to promote positive drainage and prevent ponding water. For best results use Hunter Panels Tapered Shop Drawings. F
EATURESAND B
ENEFITS ·Manufactured with NexGen Chemistry™ - Zero ODP, CFCFree,EPACompliant.·Approved under major roof covering systems – BUR, Coal TarModified and Single Ply applications. P
ANEL C
HARACTERISTICS INSTALLATIONS
·Available in 4'x4' (1220mm x 1220mm) panels in thickness of 1"(25mm) minimum to 4.0" (102mm) maximum in a single layer.·Available slopes are 1/8"(3mm), 1/4"(6mm), and 1/2"(13mm)per foot·Available in two grades of compresive strengths per ASTM C1289-06, Type IV, Grade 2 (20 psi), Grade 3 (25 psi).

B

UILT

U

P

, C

OAL

T

ARAND

M

ODIFIED

B

ITUMEN

S

YSTEMS Each Tapered H-Shield-WF panel must be secured to the roofdeck with Factory Mutual approved fasteners and plates (appropriate to the deck type). Maximum 4'x4' (1220mm x 1220mm) panels of Tapered H-Shield-WF may be adhered to a prepared concrete deck with a full mopping of hot steep asphalt. Application by cold adhesion also approved (contact membrane manufacturer for approved adhesives). Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications. A
PPLICATIONS ·Constructions requiring FM Class 1 and UL Class A ratings ·Single-Ply Roof Systems (Ballasted, Mechanically Attached, Fully Adhered)·Modified Bitumen Systems ·Built-Up Roofing: Asphalt and Coal Tar Systems Energy Smart Polyiso PROFILES

S

INGLE

P

LY

S

YSTEMS B
ALLASTED S
INGLE P
LY S
YSTEMS Each Tapered H-Shield-WF panel is loosely laid on the roof deck. Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications. M
ECHANICALLY A
TTACHED S
INGLE P
LY S
YSTEMS Each Tapered H-Shield-WF panel must be secured to the roof deck with Factory Mutual approved fasteners and plates (appropriate to the deck type). Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications. F
ULLY A
DHERED S
INGLE P
LY Each Tapered H-Shield-WFpanel must be secured to the roof deck with Factory Mutual approved fasteners and plates (appropriate to the deck type). Maximum 4’x4’ (1220mm x 1220mm) panels of Tapered H-Shield-WF may be adhered to a prepared concrete deck with a full mopping of hot steep asphalt. Application by cold adhesion also approved. Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications.

888-746-1114 · WWW.HUNTERPANELS.COM