Text version of the page

T

S

LOPED

APERED

P

OLYISO

I

NSULATIONWITH

H-S

HIELD

C

OATED

-CG

G

LASS

F

ACER HUNtER PRODUCT DESCRIPTION Tapered H-Shield-CG is a sloped rigid roof insulation panelcomposed of a closed cell polyisocyanurate foam core bonded on-line to coated glass fiber matt facers (gray). Tapered H-Shield-CG isdesigned to promote positivedrainage and prevent ponding water. For best results, useHunter Panels Tapered Shop Drawings. F
EATURESAND B
ENEFITS ·Manufactured with NexGen Chemistry™ - Zero ODP, CFCFree,EPACompliant· Premium facer improves water resistance and dimensionalstability.·Enhanced performance with cold applied BUR, Modified Bitumenand Fully Adhered Single Ply systems.·Meets FM 4450 and UL 1256 for direct application to metal deckconstruction. INSTALLATIONS P
ANEL C
HARACTERISTICS

B

UILT

U

P

, C

OAL

T

ARAND

M

ODIFIED

B

ITUMEN

S

YSTEMS ·Available in 4'x4' (1220mm x 1220mm) in thickness of 1/2” (12mm)minimum to 4.0" (102mm) maximum in a single layer.·Available slopes are 1/16"(2mm), 1/8"(3mm), 3/16"(5mm),1/4"(6mm), 3/8"(10mm) and 1/2"(12mm) per foot·Available in two grades of compressive strengths per ASTM C1289-06, Type II, Class 2, Grade 2 (20 psi), Grade 3 (25 psi).·Other panel sizes and facers are available upon special request. Each Tapered H-Shield-CG panel must be secured to the roofdeck with Factory Mutual approved fasteners and plates (appropriate to the deck type). Maximum 4'x4' (1220mm x 1220mm) panels of Tapered H-Shield-CG may be adhered to a prepared concrete deck with a Hunter approved adhesive. Application by cold adhesion also approved. Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications. A
PPLICATIONS ·Constructions requiring FM Class 1 and UL Class A ratings ·Single-Ply Roof Systems (Ballasted, Mechanically Attached, Fully Adhered)·Modified Bitumen Systems ·Built-Up Roofing: Asphalt and Coal Tar Energy Smart Polyiso

S

INGLE

P

LY

S

YSTEMS B
ALLASTED S
INGLE P
LY Each Tapered H-Shield-CG panel is loosely laid on the roof deck. Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications. PROFILES M
ECHANICALLY A
TTACHED S
INGLE P
LY S
YSTEMS Each Tapered H-Shield-CG panel must be secured to the roof deck with Factory Mutual approved fasteners and plates (appropriate to the deck type). Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications. F
ULLY A
DHERED S
INGLE P
LY Each Tapered H-Shield-CG panel must be secured to the roof deck with Factory Mutual approved fasteners and plates (appropriate to the deck type). Maximum 4'x4'(1220mm x 1220mm) panels of Tapered H-Shield-CG may be adhered to a prepared concrete deck with a full mopping of hot steep asphalt. Application by cold adhesion also approved. Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications. Approved adhesives include, but are not limited to, the following:· FAS 100· Insta Stik· Olybond· MillenniumSee FM listing for all other adhesive approvals.

888-746-1114 · WWW.HUNTERPANELS.COM