Text version of the page

T

S

LOPED

APERED

P

OLYISO

I

NSULATION

H-S

HIELD

PRODUCT DESCRIPTION Tapered H-Shield is a sloped rigid roof insulation panelcomposed of a closed cell polyisocyanurate foam core bonded on-line to fiber reinforced facers. Tapered H-Shield is designed to promote positive drainage and prevent pondingwater. For best results, use Hunter Panels Tapered Shop Drawings. F
EATURESAND B
ENEFITS ·Manufactured with NexGen Chemistry™ - Zero ODP, CFCFree,EPACompliant·Approved under major roof covering systems – BUR, Modifiedand Single Ply. P
ANEL C
HARACTERISTICS ·Available in 4'x4' (1220mm x 1220mm) in thickness of 1/2” (12mm)minimum to 4.0" (102mm) maximum in a single layer.·Available slopes are 1/16"(2mm), 1/8"(3mm), 3/16"(5mm),1/4"(6mm), 3/8"(10mm) and 1/2"(12mm) per foot·Available in two grades of compressive strengths per ASTM C1289-06, Type II, Class 1, Grade 2 (20 psi), Grade 3 (25 psi).·Other panel sizes and facers are available upon special request. INSTALLATIONS

B

UILT

U

P

, C

OAL

T

ARAND

M

ODIFIED

B

ITUMEN

S

YSTEMS Each Tapered H-Shield panel must be secured to the roof deckwith Factory Mutual approved fasteners and plates (appropriate to the deck type). Maximum 4'x4' (1220mm x 1220mm) panels of Tapered H-Shield may be adhered to a prepared concrete deck with a full mopping of hot steep asphalt. Application by cold adhesion also approved. Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications. A
PPLICATIONS ·Constructions requiring FM Class 1 and UL Class A ratings ·Single-Ply Roof Systems (Ballasted, Mechanically Attached, Fully Adhered)·Modified Bitumen Systems ·Built-Up Roofing: Asphalt and Coal Tar Energy Smart Polyiso PROFILES

S

INGLE

P

LY

S

YSTEMS B
ALLASTED S
INGLE P
LY S
YSTEMS Each Tapered H-Shield panel is loosely laid on the roof deck. Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications. M
ECHANICALLY A
TTACHED S
INGLE P
LY S
YSTEMS Each Tapered H-Shield panel must be secured to the roof deck with Factory Mutual approved fasteners and plates (appropriate to the deck type). Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications. F
ULLY A
DHERED S
INGLE P
LY Each Tapered H-Shield panel must be secured to the roof deck with Factory Mutual approved fasteners and plates (appropriate to the deck type). Maximum 4'x4'(1220mm x 1220mm) panels of Tapered H-Shield may be adhered to a prepared concrete deck with a full mopping of hot steep asphalt. Application by cold adhesion also approved. Butt edges and stagger joints of adjacent panels. Install the roof covering according to the manufacturer's specifications.

888-746-1114 · WWW.HUNTERPANELS.COM