Radio Control Transmitters
4Pages

Hubbell Industrial Controls, Inc. Radio Control Transmitters Hubbell Radio Remote Control Systems Catalog 31.300 • June 1999 • New Replaces Catalog Sheet 31110 of Mar 95 Catalog Sheet 31115 of Sep 97 Catalog Sheet 31120 of Jun 96 All Hubbell Radio Control Transmitters use the latest microcontroller technology and ultra reliable Manchester II (biphase) digital, FM data transmission. These transmitters are for use with 31.340 – Compact Locomotive Transmitter Hubbell radio control receivers on cranes, locomotives, etc. The transmitters operate on a licensed frequency in the 72 to 76 MHz or the 450 to 470 MHz bands. (Only the catalog 31.130 equipment is license-free.) A typical transmitter has three or four stepped or stepless lever function switches for the main crane motions. Toggle switches and push buttons are used for the auxiliary functions. The key operated “On/Off” switch controls power to the transmitter, and the “Run/E-stop” toggle switch controls the main line contactor on the crane. Two toggle switches are used for the control of any lifting magnets: one for “Lift” and both for “Drop”. An LED indicates transmitter is operating normally when it flashes at the transmit rate and comes on steady when the Ni-Cad battery needs recharging. Internal antennas are used with all transmitters, except the hand-held, which uses an external antenna. The fixed transmitter uses coax cable to its remote antenna.

Hubbell Radio Remote Control Systems 31.100 Microcontroller Radio Crane Control Systems 31.110 Compact Style AC Receiver 31.120 Compact Style DC Receiver 31.130 License-free Systems 31.200 Microcontroller Radio Locomotive Control Systems 31.210 Compact Style Receiver 31.310 Full Size Transmitter This portable transmitter is housed in a light, rugged, weather proof plastic case suitable for severe industrial environments. The switches for control of Bridge, Trolley and Hoist are reliable return-to-center devices with positive detents in all positions. Up to five-speed, or stepless reversing...

31.340 Compact Locomotive Transmitter The Hubbell Hand-Held Transmitter is a microcontroller for use with Hubbell biphase or microcontroller receivers. It is suitable for the remote control of overhead cranes, locomotives, etc. The transmitter is fully self contained with battery, controller board, rf board, antenna, switches and indicators in a small, lightweight, rugged plastic case. The transmitter is equipped with a 72– 76 MHz rf board and external antenna. Hubbell also offers a compact transmitter designed specifically for Radio Locomotive Control Systems, available in 72–76 MHz or...

Frequency Range Channel Available Frequency Stability -10 to 60° C Emission Type Spurious/Harmonic Output (below carrier) Output to Antenna Effective Radiated Power Nominal Range (line of sight) FCC Identifier Canada Certificate Number Voltage Requirement Battery Usage Recharge Time Operating Temperature Relative Humidity LED Indicator -22° F to 140°F -30° C to 60° C 20% to 90% non - condensing Flashing: transmitting Steady: low battery** Function Lever Switches Auxiliary Switches Weight with Battery 4 lever switches max. 4 lever switches max. 8 toggle sw./p.b. 8 toggle sw./p.b. 10 lbs. 6.5...