OEM Pressure sensor 400 0 ... 10 - 100 mbar
4Pages

{{requestButtons}}

Catalog excerpts

OEM Pressure sensor 400 0 ... 10 - 100 mbar - 1

Pressure transmitter OEM Pressure sensor Type 400 Pressure range 0 ... 10 – 100 mbar The type 400 pressure transmitter, with its proven ceramic lever technology, has adjusted temperature compensated sensor signals and is available with a voltage output. The voltage output (VDC) is an amplified, linear signal suitable for direct processing in electronic control systems. The sensors are ideal for continuous level measurement in washing machines, dishwashers etc. + Robust construction, sensor element has no contact with media + Special design developed for large scale manufacture at an attractive price + Fully automated manufacture, including in-line adjustment of zero point and full scale value + Special snap mounting bracket for easy single handed mounting in sheet steel of varying thicknesses Huba Control Type 400 | Technical data subject to change | Edition 06/2020

Open the catalog to page 1
OEM Pressure sensor 400 0 ... 10 - 100 mbar - 2

Technical Overview Pressure range 1) Relative Operating conditions Medium Medium / ambient Temperature Storage Tolerable overload Rupture pressure Leak rate Liquids and neutral gases 0 ... +70 ºC -10 ... +70 ºC 200 mbar 500 mbar < 0.2 cm3/h (Air) Materials in contact with the medium Cover Diaphragm Polypropylene Thermoplastic elastomer Electrical overview Output / Power supply 2) ratiom. 10 ... 70% 5 VDC ±5% Load > 50 kOhm / < 10 nF Current consumption At nominal voltage with 50 kOhm load < 3 mA Polarity reversal protection mechanically protected Electromagnetic compatibility The product is...

Open the catalog to page 2
OEM Pressure sensor 400 0 ... 10 - 100 mbar - 3

Order code selection table Order number 0 ... 10 mbar 0 ... 20 mbar 0 ... 30 mbar Pressure range 0 ... 50 mbar 0 ...100 mbar pressure ▲ Full scale signal at these Accessories (supplied loose) Order number Connector RAST 2.5 with cable 30 cm Connector RAST 2.5 with cable 110 cm Connector RAST 2.5 with cable 150 cm Calibration certificat AMP Connector 1) Manufacture‘s Part No. Colour for flexible wire 3-829868-3 grey 7 x 0.20 mm = 0.22 mm2 or 12 x 0.20 mm = 0.35 mm2 1-966194-3 beige 7 x 0.25 mm = 0.35 mm2 Connector with cable IN = red OUT = yellow GND = black Dimensions in mm / Electrical...

Open the catalog to page 3
OEM Pressure sensor 400 0 ... 10 - 100 mbar - 4

Huba Control AG Headquarters Schweiz Industriestrasse 17 CH-5436 Würenlos Telefon Niederlassung Deutschland Vestiging Nederland Succursale France Branch Office United Kingdom Unit 13 Berkshire House, County Park Technopôle Forbach-Sud Business Centre, Shrivenham Road

Open the catalog to page 4

All HUBA CONTROL catalogs and technical brochures