HRSflow CONTROL UNITS The Reliable Partner For Your Molding Challenges The HRSFlow control units T-Tech, VT-Tech, V0Tech V-Tech and V3Tech are designed to optimize the molding process for plastic applications. Our complete line allows to adjust the temperature of hot runner systems in an accurate and reliable way for both Multi cavities and wide component systems, to realize an advanced diagnostic system, to monitor energy consumption and to manage the sequential valve gate opening and closing in the most widespread modes (time, location, volume and pressure). Main advantages: Part quality optimization Scrap Reduction Energy saving

Thermo regulation control unit 7” LCD with centralized logic Multilingual interface Advanced PID with real-time self-tuning Hot runner full diagnostic capability 4 fully configurable soft-start settings Automatic switch in manual mode in case of TC failure Rewiring function (an heater can be piloted with any TC of the system) Zone grouping Full alarm management Complete I/O supply for moulding machine interface 15” optional touch-screen pc for advanced features Several kind of cable available in different configurations Sequential control unit Basic control unit for sequential management Two...

Sequential control unit Mono and Bi-Stable electro-valves management Time, position and volume mode Display LCD with central logic Multilingual Interface Double opening / closing commands for injection cycle 1 injection / 1 holding pressure signal management Verify that at least one valve-gate is open during the entire cycle Several kinds of cable available in different configurations Advance sequential control unit Mono and Bi-Stable electro-valve management Time, position, volume and pressure mode 7” LCD with centralized logic Multilingual interface Up to 5 opening / closing commands for injection...

Temperature controller and sequencial injection integrated Double 7” LCD with centralized logic From 12 up to 120 zones for thermoregulation and from 4 to 20 zones for sequential control All the advanced features of T-tech and V3-Tech models 15” Touch-screen pc with Win’TTech and Win’V3Tech supervisory softwares for a user-friendly management of all the features available Several kind of cables availables in different configurations Regulation and Control units The complete range of HRSflow control units meet the needs of any molding environment. They are conceived to maximize the injection molding...

H.C.U. Hydraulic control unit Hydraulic control unit with electro-valves (both mono and bistable effect). Models from P.M.U. Pressure multiplier unit (booster) 6 to 12 mono and bistable electro-valves Pneumatic compression booster with management. Available also without electro- accumulator. Maximum working pressure valves. Several lengths of oil pipes accessories. output: 16 bar booster 10 liters. PDS Pneumatic distributor with monostable or bistable electro-valves, maximum working pressure output: 10 or 16 bar. Available from 2 to 12 zones. HSD Hydraulic distributor with monostable or bistable...

Space for contact reference Via Piave, 4 31020 S.Polo di Piave (TV) I Tel. +39 0422 750111 Fax. +39 0422 750301 [email protected] www.hrsflow.com