DS1000 MU Disc Brake Caliper
2Pages

{{requestButtons}}

Catalog excerpts

DS1000 MU Disc Brake Caliper - 1

DS1000 MU Disc Brake Caliper 2 Caliper Part Number. 6780918 7680918 0.75 kg. (1.65 lb) 5mm (0.20 in) 58cm (22.83 in) (2 Pads) 30 x 50 x 21 mm thick (1.18 x 1.97 in x 0.83 in) Asbestos-free high friction material AVAILABLE SPARES Component Part No. Arm Assembly - Thruster 6640177 Arm Assembly - Slotted 6640178 Pivot Post 8240039 Pad Retaining Spring 2400093 Tension Spring 2400109 Brake Pad 7080047 M10 Mounting bolt (46Nm) (33.93 ft lb) Bolt not supplied with caliper Weight Pad wear allowance Total pad area Pad dimensions new Pad material Twiflex Disc Brakes must be used with Twiflex asbestos free brake pads. The use of any other brake pads will invalidate the warranty. Twiflex Limted reserves the right to modify or change the design without prior notice.

Open the catalog to page 1
DS1000 MU Disc Brake Caliper - 2

General Description The’ MU’ series of disc brake calipers are the smallest in the Twiflex range and are designed for light duty stopping and holding applications. This range of brake calipers can be used used with 8mm (0.31 in) or 12.7mm (0.50 in) thick discs. Normally one or two units will be used per disc but the number may be increased, depending on disc size. The brake units can be positioned at any angle around the periphery of the disc, but ideally they should be mounted horizontally ( in 3 or 9 o’clock positions ) in relation to the disc. Discs: A range of standard discs of 12.7mm...

Open the catalog to page 2

All Howdon Torque limiters catalogs and technical brochures

  1. SOBO® iQ

    1 Pages

  2. DB 2002

    2 Pages

  3. DB 2009

    2 Pages

  4. DS2508

    2 Pages

  5. Brake Discs

    1 Pages

  6. PFS Coupling

    1 Pages

  7. DFS Coupling

    1 Pages

  8. NFS Coupling

    1 Pages

  9. Type S HUB

    1 Pages

  10. Disc Hubs

    1 Pages

  11. Phasing Hubs

    1 Pages

  12. DS1508

    2 Pages

  13. DS1507

    2 Pages

  14. DS1003

    2 Pages