Glasrope heater
8Pages

{{requestButtons}}

Catalog excerpts

Glasrope heater - 1

Glasrope® HeatersSingle and Double Applications Pipes, Tubes, and other similar apparatus where spot or particular locations need to be warmed, Odd Shapes such as: Laboratory Beakers. Valves, Piping. Appliances, Drier Units for Blueprint Machines, Incubators, and Tracers for Pipelines Features (Single Glasrope6) C. ' 1 . 1 : : 1 ■ ■ ■ 1 ' I ■ ■ • The Hotwatt Single Glasrope* Heater has a termination on each end. • The nominal diameter is 165' x 032* wall for 120 volts, and .180* x 040‘ wall for 240 volts • Lengths to 300’ • Maximum temperature is 900“F (482'C). • Made in U.S.A Features (Double Glasrope*) • The Hotwatt Double Glasrope* Heater has two terminations on the same end. • The nominal diameter is .300'. • Lengths to 1 50*. • Maximum temperature is 900”F MB2'C). • Made in U.SA. Construction 1 Flexible woven fiberglass braid 2 Premium grade resistance wire element. 3 Braid retainer 4 Fiberglass insulated leads Construction 1 Single Glasrope* 2 Additional fiberglass sleeve 3 Premium grade resistance wire element 4 Braid retainer. 5 Fiberglass insulated leads.

Open the catalog to page 1
Glasrope heater - 2

Single Glasrope® Glasrope® HeatersSingle and Double ▼ Manfactured Items ▼ Catalog Maximum LengthNumberWattage Cat No. Diameter Watts Volts Lead Insulated Tape Heaters Unit lengths between and longer than those listed may be ordered. Wattage Maximum wattage is based on 5 watts per linear inch of heater. Higher or lower wattages are available depending on the application. Voltage Voltage is normally 120 or 240 volts. Lower voltages are available. How To Order Specify: GR16 followed by length, wattage, voltage, lead length, and special features if required. Double Glasrope® Catalog...

Open the catalog to page 2
Glasrope heater - 3

Glasrope® HeatersSpecial Glasrope® High Temperature Glasrope®: GH16 Silicone Rubber Glasrope®: GS16 • The Hotwatt High Temperature Glasrope® Heater is similar to the Standard Single Glasrope® Heater in construction except the woven fiberglass braid is of special design to withstand higher temperatures. • The nominal diameter is .165". • Lengths to 300". • Maximum temperature is 1200°F (649°C). • Made in U.S.A. Construction 1 Flexible woven high temperature fiberglass braid. 2 Premium grade resistance wire element. 3 Braid retainer. 4 Fiberglass insulated leads. Wattage Maximum wattage is...

Open the catalog to page 3
Glasrope heater - 4

Glasrope® Heaters Special Glasrope® (Cont.) Flexible Metal Glasrope®: FM25 Standard Termination SF1: Flexible leads. Standard length is 6". Longer lengths are available. Leads are non-repairable. Special Features SF11A: Ring terminals. Specify #6, #8, or #10. • The Hotwatt Flexible Metal Glasrope® is for high temperature, corrosive applications. • The nominal diameter is .250". • Lengths to 120". SF11B: Female straight quick connect terminals. Specify 3⁄16" or 1⁄4". • Maximum temperature is 1300ºF (704ºC). • Made in U.S.A. SF11C: Female flag quick connect terminals. Specify 3⁄16" or 1⁄4"....

Open the catalog to page 4
Glasrope heater - 5

Foil HeatersFOIL C.U.L Reeognired-No E56973 Construction 1 Aluminum foil. 2 hsulating sleeve 3 Premium grade resistance wire element. 4 Insulated leads. Applications Batteiy Warmers. Cabinets. Defrost Applications. Heated Food Tables. Incubators. Laboratory Equipment. Ceiling Panels, and Wall Panels. Features • The Hotwatt Foil Heater is a self-contained one-piece assembly. • A resistant element is laminated between tvro layers of aluminum foil. • The heater is ideally suited for area and surface heating applications • Sheath temperatures to 300*F (149'C) • Widths range from IX'...

Open the catalog to page 5
Glasrope heater - 6

Foil Heaters Foil Heater Construction Type A: Self-Adhering: Flexible Standard Termination SF1: Flexible leads for applications where leads can be bent close to the end of the unit. Leads are non-repairable. Special Features SF11A: Ring terminals. Specify #6, #8, or #10. Aluminum foil. Adhesive. Element. Aluminum foil. SF11B: Straight quick connect terminals. Specify male or female and size: 3⁄16" or 1⁄4". Adhesive. Release paper. Type B: Mechanically Fastened: Flexible SF11C: Flag quick connect terminals. Specify male or female and size: 3⁄16" or 1⁄4". SF11D: Spade terminals. Specify #6,...

Open the catalog to page 6
Glasrope heater - 7

TUBULAR SHEATHED GLASROPE Tubular Sheathed Glasrope® Heaters • A seal is used for wet or moist applications. Applications Blueprint Machinery, Cabinets, Compressor Crankcase Heating, Copiers, and Defrost Heaters. Features • The Hotwatt Tubular Sheathered Glasrope® Heater is a fiberglass insulated element encased in aluminum or stainless steel tubing. • The stainless steel heater is for higher temperatures of corrosive applications. • Extra long leads and special terminations are available. (6” long leads are standard.) • The heater may be formed to special configurations. • Special wattage...

Open the catalog to page 7
Glasrope heater - 8

Tubular Sheathed Glasrope® Heaters Diameter: >4" Standard with One Lead Each End Catalog Number Maximum Length_Aluminum Sheath_Wattage Standard Termination Diameter: 3/8" Standard with Both Leads Same End Catalog Number Maximum Length_Aluminum Sheath_Wattage Minimum Inside Radius 1/2" 1" For Forming Minimum Helical Diameter 1" 2" For Forming Normal Cold Ends1"1" Standard Lead Length6"6" Maximum Temperature 550°F (288°C)550°F (288°C) SF37: Stainless steel sheath. TUBULAR SHEATHED GLASROPE Watts Per Linear Inch vs. Temperature In Air Temperature °F°C_Watts/Linear Inch How to Order Specify:...

Open the catalog to page 8

All Backer Hotwatt Inc catalogs and technical brochures

  1. Band Heater

    9 Pages

  2. Strip Heaters

    12 Pages

  3. BAND HEATERS

    9 Pages

  4. Accessories

    5 Pages

  5. HOTWATT INC

    176 Pages